8.5x2 (50/75-6.1 8.5") tyre suit Xiaomi M365 8.5"

First three product images show the Wanda and Chao Yang variants. The last image shows the CST variant.

Suits most entry-level scooter that have a relatively low profile 8.5" tyre running 6.1" rim such as Xiaomi M365 series including original M365, 1s, 2, 3, Pro, Pro 2 and Essential. Also suits "copies" such as e-Glide Swift, e-Glide D150 & G60, Dualtron Mini and Mearth S. These tyres have 155.5mm internal diameter for 6.1" rim hub. This size will not suit Xiaomi 4 Pro which adopts 10" 60/70-7.0.

Available as:

• Generic unbranded or Wanda Branded Tube Type (8½ x 2)
  • Ideal for when tubes are required, which is the majority of common M365 makes/models that used tubed rims including genuine Xiaomi M365, most copies and makes/models that adopt similar hubs such as Kugoo M2 Pro.
  • Sidewall name plate unbranded: JL-001-22 / Wanda branded: P1457A-08. Both are marked "TUBE TYPE". Product image shows Wanda branded version, the unbranded version is visually similar and appears identical, with the only noticeable difference being nameplate markings.
  • Has relatively thin 4.6mm width at bead to accommodate inner tube type with 153mm inner diameter. Relatively soft sidewall allows for relatively "easier" fitting.
  • Typical / standard factory stock tread pattern. Typical weight 363 grams (heavier than entry level <250 gram offerings).
  • The Wanda tyre is well described and product reviewed at E-Watts, with good adoption, quality and suitability of this well proven option.
• CST "reinforced V3" 8½ x 2 Tube type (white line)
  • The CST "reinforced V3" design improves performance over entry-level 8.5x2 tyres, having a different tread pattern and inflating to a more "round" shape as demonstrated by MoovMoov.
    
  • The CST is recognised amongst other brands of tyres in this size as having a good reputation to run as a resilient option (puncture resistance). You can read further as described and favoured at E-Watts (France).
  • Adopts a more "performance road" tread pattern than typical / standard factory stock tyres, with slightly more rounded shape compared to typical factory stock tyres as shown image above.
  • Typical weight 375 grams (heavier than entry level <250 gram offerings).
  • C-9287-1 nameplate.
  • Usually paired with CST tube to form a "CST system". The CST tubes are marked 8.5x2 or 9x2 (they are both the same). The CST tube, and others are listed here.
• Chao Yang branded 50/75-6.1 Tubeless
  • Suits tubeless models such as eGlide G60 (and tubeless variants of D150 and E-Glide Swift). Also used for tubeless conversions / hacks, aftermarket tubeless hubs (some aftermarket motor hubs are supplied with tubeless tyre) or any copies that adopts the uncommon approach of providing tubeless rims as a standard inclusion.
  • Does not state tubeless on sidewall (as could be adopted for tubed application) but is regarded as tubeless by the factory agency. Has a relatively wide 5.6mm width at bead to support tubeless use, with firm sidewall - would likely be more "difficult" to fit than tubed Wanda branded alternative. 153mm inner diameter.
  • Similar tread pattern to typical / standard factory stock tyres, with brail-like "tread bumps" along the outside of the tyre face. Typical weight 363 grams (heavier than entry level <250 gram offerings).
  • H790-13 nameplate.
  • Drop in compatible with CST 8½ x 2 tubeless HY 205-13.
• Ulip 10x2 Oversized Tubeless
  • New tyre released 2024. Suits makes/models that have had a booster kit to support oversized 10" tyre on 6.1" rim.
  • Supports tubeless conversions / hacks, aftermarket tubeless hubs (some aftermarket motor hubs are supplied with tubeless tyre) or any copies that adopts the uncommon approach of providing tubeless rims as a standard inclusion.
  • Marketed as having 155.5mm inner diameter (TBC).
  • Traditional Ulip "resilient road" tread. Typical weight: 450g
  • NP-1003-01. Also available from AliExpress.
  • This is the only 10" tyre for 6.1" rims that eScootNow stocks and has nameplate 50PSI as most other 10x2 offerings are a relatively light tyre not suited to eScooters and adopt relatively low 36PSI which impacts likelihood of pinch punctures and impacts resilience.

Use corresponding inner tube, 8.5x2" (50-156) Tube Straight Valve with these tyres where tube is required.

Fitting these is all about techniques. Learn from the Pro's at e-Watts France: