Mobile Phone Holder for eScooter

Offered in two variants:

• With a bar clamp mount, which attaches to handlebar using a quick lock clamp, or
• a "Rear view mirror" mount version, which has a 90mm bracket with an attachment hole (10mm diameter).

The rear view mirror mount bracket is designed to attach to motorbike mirror mounts. If you have no similar mounting opportunity, 3rd party brackets can be used. The 90mm length of the rear view mirror bracket arm is relatively long, which aids positioning the phone so it does not need be closely coupled to the bar where it competes with other instrumentation. This helps clear displays, instrumentation, bell, headlights, cables and all those other things that collectively take up a lot of room. The long arm allows for better positioning up to be within rider field-of-view and closer to the handgrip.

If a smaller size hole is required for motorbike mount, T gaskets can reduce the 10mm diameter of the hole in the rear view mirror mount plate, for example

• The clamp that support the sides of the phone extends over the front facing edges of the phone's protective case. The length of clamps is 55mm along each side. This clamp does not "pinch" on a discrete area of the phone when tightened up, it shares the weight distribution along the 55mm length. That weight distribution reduces the acute pressure and stress on the side of the handset and screen protectors.
• These holders support width of up to 80mm and 11mm thickness, including your phone's protective case. If your cased device is larger than that dimension, this holder will not be fit-for-purpose.
• With knobs on both sides of the holder, it is pretty convenient and quick to secure and detach the handset.
• There are minimal sharp metal edge protrusions - all edges are rounded, reducing potential harm to rider.
• Holder can be rotated for 90 degree landscape orientation without tooling.