TurboCharge Charger 42.0V for 36V 8mm Plug 2A (suit Ninebot / Xiaomi / INMOTION Climber / Pure Air) [XVE90]

• The TurboCharge Charger 42.0V for 36V 8mm Plug 2A (Ninebot / Xiaomi / INMOTION Climber / Pure Air) [XVE90] is a common charger used on 36V models of eScooters with a round DC barrel jack charging port (often inappropriately called RCA-style).
• Suits almost any Ninebot with an 8mm Plug such as:
  • Ninebot ES & E-Series: ES1, ES2, ES3, ES4, E22, E25, E45 and E2 Pro (note some E2 series models may have smaller 5.5mm/2.1mm connector, similar to that on the 25.2V C2 series kid and youth models).
  • Ninebot F-Series: F20, F25, F30, F40 and G2 series models of F2, F2 Plus and F2 Pro.
  • Ninebot D-Series: D18, D28 and D38.
  • Ninebot Max Series: Max G30, G30L, G30LP and Max G2 (as alternative to the AC 3-pin cloverleaf C5 connector or with for secondary/fast charging).

Also suits:

• Xiaomi M365 & subsequent Pro, Pro2 & 1S models,
• INMOTION Commuter Climber, and
• Pure Air (except Air 5 Ultra Suspension) models.
• Manufactured for eSN by XVE, well known charger manufacturer.
• Fitted with 8mm DC Barrel Plug (with center pin being +ve) which is adopted almost universally across eScooter models.
• 100-240 volt input via C8 panel socket, includes Australian 3-pin power cable with C7 female plug.
• Charging status led presents Red = charging, Green = full or disconnect.
• Silent, fan-less design.
• Compliant with Regulatory Compliance Mark (RCM), proof of RCM compliance certificate number: GMA-510614-EA (to 17/08/26) and subsequent GMA-521398-EA (to 31/12/29).
• For your safety, include your scooter's make / model / serial / voltage and battery Ah capacity as order comment on checkout so that the appropriate voltage can checked to best of our ability as part of order fulfilment. Remember some makes have models that are available in variants that have different voltages and inappropriate selection of higher voltages is a common cause of thermal runway and house fires folks.

Notes:

1. If a smaller plug is required, including for those on some Ninebot E2 series models (5.5/2.1mm), use TurboCharge Conversion Cable 8MM Socket to 5.5mm 2.1 & 2.5mm Plug.