ULIP 10x2.125 {-6.6} Tyre (tubeless & tube type, OSH) [HP-1003]

• The ULIP 10x2.125 {-6.6} Tyre (tubeless & tube type, OSH) [HP-1003] is an aftermarket alternative to original factory stock tyre on:
  • InMotion Climber (AKA Commuter Climber), Air and Air Pro, and
  • Inaugural Ninebot F Series models such as F20, F25, F30, F40 & F65 and Ninebot D series such as D18, D28, D38.
    • F2 series (including Plus and Pro) require 10x2.50 {6.5} tubeless.
• Available with or without self-healing liner. The self-healing lining is a thick lining of sticky stuff ("goo") that can assist seal punctures, also known as "puncture-proof" or "run flat". It has a higher viscosity than liquid sealants and typically will not run and damage hub alloy.
  • The non-self healing version is typically paired with Yuanxing 10x2.125 tube straight valve.
  • Self healing can be accomodated in Ninebot models which are typically solid rims enabling this tyre to be fitted in tubeless operation when fitted with a straight valve. ULIP do market this tyre as suitable for tubeless, but there is no designation on sidewall nameplate as in most instance this tyre is fitted with tube. The self-healing liner version requires tubeless operation.
• Typical weight:
  • Non-self healing: 610 grams (heavier than stock Yuanxing original factory stock tyre), and
  • Self-healing: 730 grams.
• The tread pattern of this tyre offers better puncture resilience and off-road traction (such as on wet grass) than original factory stock tyre.

Notes:

1. Factory dimensions:
   
2. With InMotion Climber, often the rim size is "rounded up" from 6.6" to 7" as explained here, specifically this advice from InMotion.
3. How to change the inner tube video from InMotion for the Climber. Climber was marketed as InMotion Commuter Climber in Australia through Scooter Hut.
4. A 60/70-7.0 size tyre is observed fitted on the InMotion Global Air Pro disassembly video, so note your existing nameplate size on Air models as a larger 7" rim tyre may be required. Air Pro rear is a factory solid.