Home/Store/Kaabo Spares/Controllers & Main Lines
Kaabo Controller 60V 25A K2 {KM03 & CM06-K2} (Mantis 10 Central Display)
+3
+2

Kaabo Controller 60V 25A K2 {KM03 & CM06-K2} (Mantis 10 Central Display)

SKU K-CONT-60V-25A-K2/A-REAR-03.D.06102
AU$152.73
Type
Suits Central Display equipped models of Mantis 10 Plus & PRO.
In stock: 1 available
1
Save this product for later
Customer reviews
Reviews only from verified customers
No reviews yet. You can buy this product and be the first to leave a review.
Kaabo Controller 60V 25A K2 {KM03 & CM06-K2} (Mantis 10 Central Display)
Product Details
Brand: Kaabo
  • The Kaabo Controller 60V 25A K2 {KM03 & CM06-K2} (Mantis 10 Central Display) is the factory stock controller on the relatively uncommon models of Kaabo Mantis 10 Plus and Pro that are factory fitted with KM03 Central Display.
  • This controller uses K2 protocol which is compatible with KM03 Central display and therefore retrofitted in Mantis models with that display to uplift from LT01 and EY3 display/throttles with appropriate main line. The controller also supports with CM06-K2 display throttle.
  • Has white JST XH connectors which connect to the hub / wire collection board.
  • Commonly required to due to damage from water ingress and/or MOSFET damage which can result in resistance on wheel when attempting to freewheel by hand when controller is connected. Also required if wanting to uplift to KM03 Central Display or CM06, both have NFC capability.
  • Supplied individually, order both A (Rear) and B (Front) for both front and rear controllers.

Notes:

  1. Refer to Reference Materials for Kaabo Page for technical info including wiring diagram guidance.
  2. Refer to the main lines product page for suitable types if uplifting from LT01 to KM03 Central Display as main line arrangements need accommodate the 3-pin yellow connector for throttle and changes to other instrumentation such as ECO/Turbo / Single/Dual switch.
  3. This controller is not suitable to fit into models with an LT01 display/throttle, such models are K1 protocol controllers and require K1 controllers of V2 or earlier V1.

Show More
You May Also Like
Wire Collection Board / Hub suit Kaabo Mantis and Wolf Warrior (HUB-1)
Wire Collection Board / Hub suit Kaabo Mantis and Wolf Warrior (HUB-1)
Wire Collection Board / Hub suit Kaabo Mantis and Wolf Warrior (HUB-1)
Accommodates white XH/XHB connectors
AU$38.18
Kaabo Controller 60V 25A K1 V1 {LT01 & CM06-K1} (select Mantis 10 Plus)
Kaabo Controller 60V 25A K1 V1 {LT01 & CM06-K1} (select Mantis 10 Plus)
Kaabo Controller 60V 25A K1 V1 {LT01 & CM06-K1} (select Mantis 10 Plus)
Suits Mantis 10 Plus prior to 2022, Black JST SM, Sine Wave.
AU$140.91
Kaabo Controller 60V 25A K1 V2 {LT01 & CM06-K1} (select Mantis 10 Plus)
Kaabo Controller 60V 25A K1 V2 {LT01 & CM06-K1} (select Mantis 10 Plus)
Kaabo Controller 60V 25A K1 V2 {LT01 & CM06-K1} (select Mantis 10 Plus)
Suits Mantis 10 Plus ~2022-2024, White JST XH, Sine Wave.
AU$140.91
Kaabo Controller 60V 2x27A V1 {EY3} (select Mantis 10 inc PRO+)
Kaabo Controller 60V 2x27A V1 {EY3} (select Mantis 10 inc PRO+)
Kaabo Controller 60V 2x27A V1 {EY3} (select Mantis 10 inc PRO+)
Suits Mantis 10 PRO+ prior to 2022, Black JST SM, MiniMotors Square Wave.
AU$268.18
Kaabo Controller 60V 2x27A V2 {EY3} (select Mantis 10 inc PRO+ / Wolf Warrior X PRO+)
Kaabo Controller 60V 2x27A V2 {EY3} (select Mantis 10 inc PRO+ / Wolf Warrior X PRO+)
Kaabo Controller 60V 2x27A V2 {EY3} (select Mantis 10 inc PRO+ / Wolf Warrior X PRO+)
Suits Mantis 10 PRO+ 2022 onwards & select Plus inc "V2 2025", White JST XH, MiniMotors Square Wave.
AU$268.18
Kaabo Main Line (Main Cable) for Wolf and Mantis
Kaabo Main Line (Main Cable) for Wolf and Mantis
Kaabo Main Line (Main Cable) for Wolf and Mantis
Harness
AU$31.82
Kaabo TFT Thumb Throttle (suit select Wolf & Mantis) [03.D.01021]
Kaabo TFT Thumb Throttle (suit select Wolf & Mantis) [03.D.01021]
Kaabo TFT Thumb Throttle (suit select Wolf & Mantis) [03.D.01021]
Horizontal Wuxing 108X suits Kaabo models with 3-pin plug such as Wolf Warrior GT / GTR Series.
AU$34.55
12V 10A (120w) Buck Converter (30-90v input)
12V 10A (120w) Buck Converter (30-90v input)
12V 10A (120w) Buck Converter (30-90v input)
High input voltage support to suit higher voltage systems with regenerative braking.
AU$34.55
Yuanxing 60/65-6.9 Road Tyre (tubeless, SH) [CY-329]
Yuanxing 60/65-6.9 Road Tyre (tubeless, SH) [CY-329]
Yuanxing 60/65-6.9 Road Tyre (tubeless, SH) [CY-329]
54mm at bead, 55PSI, with self-healing liner, suits 6.9" rim rear of Ninebot Max G2.
AU$52.73
Kaabo Pair Screw suit Wolf Warrior 11 & GT [M12x158 M15x164 M15x156 M16x65]
Kaabo Pair Screw suit Wolf Warrior 11 & GT [M12x158 M15x164 M15x156 M16x65]
Kaabo Pair Screw suit Wolf Warrior 11 & GT [M12x158 M15x164 M15x156 M16x65]
Suit steering mechanism, swing arm and suspension bracket
AU$24.55
On Sale
8.5x2 (8.5") Solid Honeycomb Tyre for 6" rim (suit Blade Q)
8.5x2 (8.5") Solid Honeycomb Tyre for 6" rim (suit Blade Q)
8.5x2 (8.5") Solid Honeycomb Tyre for 6" rim (suit Blade Q)
was AU$38.18
Save 88%
AU$4.55
NAMI Logan Brake Lever (lever suit Burn-e, Klima, Stellar and Blast)
NAMI Logan Brake Lever (lever suit Burn-e, Klima, Stellar and Blast)
NAMI Logan Brake Lever (lever suit Burn-e, Klima, Stellar and Blast)
AU$69.09
  • Search Products
  • My Account
  • Track Orders
  • Favorites
  • Shopping Bag
Display prices in:AUD
Skip to main content

Trading exclusively for Now Club members | eSN2026#JP-CN | eCruzn Group Rides | Workshops: BSG / On The Run / Ride Electric / Speedy / Baringa Bikes / EVA Motors Mackay / MESM Melbourne / Scooteroo Perth | eSN Operational Dashboard:

🟢 Order fulfilment: RESPONSIVE
eScootNow
Google Business Profile & Hours
Menu
eSN Originals
NAMI OEM Spares
Kaabo OEM Spares
Other OEM Spares
Tyres & Brakes
Everything else
▶️Socials

© 2026 Brendan Hemmings T/A eScootNow ABN: 13 114 749 078

Terms & ConditionsPrivacy PolicyRepair, Replace, Refund & Cancel PolicyReport Abuse
Powered by Lightspeed