Trading exclusively for Now Club members | eSN2026#JP-CN | Group Ride Guide | Workshops: BSG / On The Run / Ride Electric / Speedy / Baringa Bikes / EVA Motors Mackay / MESM Melbourne / Scooteroo Perth
Reference Materials for TurboCharge
This page contains trusted resources from the masterclass spare parts specialist relating to TurboCharge products and charging references of note relating to electric scooter charging systems such as those from NAMI, Teverun (and Dualtron) and Kaabo and next level TurboCharge Super Fast high-current charging connectors.
GX16 3-pin
The common GX16 3-pin standard adopts Male 1+ve, 3-ve (2 empty). Some rare models adopt pin 2 for the -ve. Reference our GX16 Charging Ports page for further info.
Dragon / Langfeite
Chargers feature a JY20 4-Pin male plug. Pinouts vary depending on system voltage, refer to the Dragon/Langfeite chargers page.
NAMI Reverse GX16 2-pin
Detailed images of the designation markings are on the NAMI Charging Port product page.
Teverun / Dualtron charging port (BM)
Chargers feature BM (Baming) connector 3-Pin male 1+ve, 3-ve (2 empty).
As tested on Teverun Fighter Supreme ULTRA and reflective of all Teverun / Dualtron models that have connector of this visual appearance.
Kaabo charging port (LT)
Chargers feature "LT" connector 3-Pin male 1+ve, 2-ve, (3 empty).
As observed on eSN stocked Kaabo charging port spare part, noting the marking on the rear of the port and reflective of all Kaabo models that have connector of this visual appearance.
Note: 3rd pin blanked on battery of Wolf GTR was observed in post by Mike McQueen November 2025. The original charger Kaabo branded AP-PN180CH08400020 (84V 2.0A) is without the 3rd pin. It is assumed the pin can be removed. De-pinning should be straight forward as that 3rd pin is not connected.
eSN TurboCharge Conversion Cables
TurboCharge conversion cables enable chargers fitted with the conventional GX16 3-pin female plug to be used on the more modern non-exposed connectors such as those above (and reverse GX-16 2-pin as adopted on NAMI models).
All cables are fabricated to eSN custom specification and feature heavy gauge wire similar to that of TurboCharge extension cables. These cables allow existing, or more commonly available chargers to be used including those that are 3rd party. Image below shows concept . Stocks expected Q4 2025. We presently have stocks of GX16 3-pin Male 1+ve, 2 empty, 3-ve to 1+ve, 2+ve, 3 empty which are required for a small number of makes/models such as eMove Cruiser as shown below adjacent to the TurboCharge Fast YZ500.
eSN TurboCharge Super Fast Charge Connectors (20 Amp YA-20-2).
For release as part of mission eSN2026#JP-CN, March 2026. Supports single-connector charging to 20 amps, typically coupled with our industrial MC900 and MC1200 desktop chargers as shown below. A suite of cables, conversion cables, panel mount charger port for eScooter and internal wiring harnesses are included in the line-up.
YM-20 3 Pin
Product size: M20
Product Series: YM
Rated Current: 20A
Wiring Type: Soldering
Interface Type: Pin
Mating Cycles> 2000 times
Product size: M20
Product Series: YM
Rated Current: 20A
Wiring Type: Soldering
Interface Type: Pin
Mating Cycles> 2000 times
Panel Socket (male): YM-20-C03SX-02-402
Line Plug (male): YM-20-C03PE-02-002
Panel socket (female) & Line Plug (male)
Line Plug (male): YM-20-C03PE-02-002
Panel socket (female) & Line Plug (male)
Images below show the inaugural samples that featured the YA-20 cable hard wired. Production version adopts newer, more appropriate YM-20 which is the quarter turn and with cap rather than hinged metal cover. Shown below MC900 (10 amps) is black, MC1400 (14 amps) is orange. Field tested March 2025 on eScootNow - The Facebook Group.
Did you know the precise voltage for chargers can be fine tuned (calibration) as shown by Finiphile:
Display prices in:AUD
