12V 1A (12w) Buck Converter (15-85v input)
+4
+3
+2

12V 1A (12w) Buck Converter (15-85v input)

Home/Store/Aftermarket Accessories & Electrical/Electrical Accessories & Aftermarkets/Buck Converter Range
SKU XW-1585-12-12W
AU$16.36
Extreme low profile.
In stock: 5 available
1
Save this product for later
Customer reviews
Reviews only from verified customers
No reviews yet. You can buy this product and be the first to leave a review.
Share this product with your friends
ShareSharePin it
12V 1A (12w) Buck Converter (15-85v input)
Home/Store/Aftermarket Accessories & Electrical/Electrical Accessories & Aftermarkets/Buck Converter Range
Product Details
Brand: XWST

Extreme low profile: 14mm * 27mm * 46/63mm @ 28 grams in ABS plastic housing.

Nameplate input: 15V to 85V DC (AKA "72v")
Nameplate output: 12V 1A (12w)

Conversion efficiency: >93%
No-load current loss: 25mA

Waterproof rating: IP67
Operating temperature: -40 to 40 degrees, to 80 degrees on lower current load.
Protection: Over-current / Over-voltage / Over-heat / Short-circuit.
No reverse polarity protection.

Note: 72V systems will exceed 85v when fully charged and under regenerative braking. This is outside of the specification of this buck converter, however within tolerance depending on duration, load and environmental factors. eScootNow has nameplate buck converters to 90v for more demanding applications, however these are physically larger than this product.

eScootNow hobbyist tips on Buck Converters:

Remember with wide voltage input Buck Converters, ensure you accommodate circumstances that would otherwise deplete battery to damaging reserve levels. I typically run a relay when implementing non-ACC (accessory) switched buck converters. Relay or ACC blue wire on ACC buck converters can take input off the controller's light switch output wire or throttle/display power-on. This isolates the buck converter when scooter is powered off.

It is best practice to keep the regulated circuit (secondary/output) of the Buck Converter isolated from the native DC circuit of your scooter. Do not bridge the two. This may also apply to the -ve of the regulated circuit, I'm yet to investigate that.

Show More
You May Also Like
12V 10A (120w) Buck Converter (30-90v input)
12V 10A (120w) Buck Converter (30-90v input)
12V 10A (120w) Buck Converter (30-90v input)
High input voltage support to suit higher voltage systems with regenerative braking.
AU$34.55
XT30 /  XT60 / XT90 Connectors and Prepared Leads (cables) including Y splitters 16AWG/14AWG/10AWG
XT30 / XT60 / XT90 Connectors and Prepared Leads (cables) including Y splitters 16AWG/14AWG/10AWG
XT30 / XT60 / XT90 Connectors and Prepared Leads (cables) including Y splitters 16AWG/14AWG/10AWG
Power cables Yellow XT Series connectors
AU$10.91
Blade fuse holder series
Blade fuse holder series
Blade fuse holder series
Protect your circuits.
AU$7.27
USB Dashboard Buck Converter for eScooter Handlebar, Wide Voltage 9-90v
USB Dashboard Buck Converter for eScooter Handlebar, Wide Voltage 9-90v
USB Dashboard Buck Converter for eScooter Handlebar, Wide Voltage 9-90v
USB handlebar power output
AU$35.45
Sold out
Automotive Horn for eScooter (including deep low frequency 430Hz)
Automotive Horn for eScooter (including deep low frequency 430Hz)
Automotive Horn for eScooter (including deep low frequency 430Hz)
Next level your audible warning with a louder, deeper automotive horn
AU$21.82
Hongfa HF41F 5mm relay (3.75-90v)
Hongfa HF41F 5mm relay (3.75-90v)
Hongfa HF41F 5mm relay (3.75-90v)
Perfect for implementing relay circuits in high DC voltage eScooters.
AU$6.36
  • Search Products
  • My Account
  • Track Orders
  • Favorites
  • Shopping Bag
Display prices in:AUD
Skip to main content
eScootNow
Google Business Profile & Hours
Menu
Categories
eSN ORIGINALS
TYRES, Tubes & Valves
BRAKE Spares
NAMI Spares
Kaabo Spares
Other Spares
Aftermarkets
Clearance
Services

© 2024 Brendan Hemmings T/A eScootNow ABN: 13 114 749 078

Terms & ConditionsPrivacy PolicyRepair, Replace, Refund & Cancel PolicyReport abuse
Made with Ecwid by Lightspeed