NAMI Rim for the Motor 60V 1000w (rim with magnets suit Klima)

• The NAMI Rim for the Motor 60V 1000w suits all Klima with exception to the Klima SE (lighter motor) and 72V (1500w) version.
• Magnets measure 45x10x14mm, magnet count 30.
• Weight: 1480 grams.
• Factory sticker designation label "03" observed on rim.
• Typically required when replacement is needed from physical damage to the outer hub, including edge of rim bend, buckle or fracture at bead/heal.
• Genuine NAMI Factory Spare.

Notes:

1. Typically not supplied with TR438 Valve. If you need one (one is required and it is recommended to renew) add a TR438 valve stem to your order.
2. A different / separate product exists for the smaller / lighter 800w motor on the Klima SE models (non-Australian Model).
3. When out of stock, pre-orders can be made and are typically filled within 6 weeks, usually less, as factory orders are placed monthly. If the item shows as in stock (available), this reflects local inventory, Brisbane.
4. Motor disassembly (Burn-e) is shown in factory video from Michael Sha:
   
5. Bearing renewal by ASG After Hours.
6. Renew motor seals periodically. Bearings on newer motors are 6203RS on rotor side and 6204-2RS on motor cable side. Older motors have 6003 both sides. This applies across Burn-e, Klima and Blast as explained in description of disassembly video shown above. Confirmed on report from Yann Lesueur and observed on nameplate of bearings in the 1500w Bullet product photo's (specifically 6203RS and 6204-2RS-Z3V3). Learn about RS vs 2RS.