Teverun Fighter Series Plastic Fender (Mud Guard with brackets) suit most 11" eScooters

• This is the plastic version factory stock fender for rear or front of Teverun Fighter 11 / Supreme Series.
• Replacement of these parts is typically required if original fender has been physically damaged, although they are reasonably resilient and tend to "bend" rather than snap/fail.
• Accommodate either front or rear (front and rear are identical ). Order qty 2 pcs if requiring both front and rear. Item excludes brackets, one is require for each side (a pair of brackets).
• The plastic fender attaches to the brackets via two M4x8mm countersunk screws on each side. Stock screws are actually 10.9 class silver plated.
• Genuine Teverun factory spare.

eScootNow also stocks extended (auxiliary) fenders for 10" scooters with a bracket that supports 12mm diameter axil, the Kaabo Mantis 10 Standard and Extended Fender Series.

Notes:

1. Teverun transitioned to carbon fiber fenders through 2024/2025 however eSN recommends the plastic version for durability.
2. Will not suit Supreme 7260R (which has a larger, 125/60-7 tyre approximately 13").
3. Also fitted to different makes/models as a 3rd party uplift for riders wanting additional protection from spray where existing stock fenders do not provide sufficient coverage, making it a great aftermarket option. This fender provides complete length coverage, it does not need to be fitted in tandem with another fender to provide adequate coverage.
4. Mounting is via the 14mm wheel axil and is keyed vertically to maintain posture on standard 14x10mm axil configuration adopted by most 11" wheel eScooters. When used with bracket, provides a bend radius to nicely accommodate brake callipers. Being an axil mount "tyre hugger" design, the fender maintains constant and close proximity to the outer diameter of the tyre and this does not vary with suspension travel.
5. This fender and the VSETT 11+ fenders have been adopted globally to improve front guard performance on the Kaabo Wolf Warrior Series with 11" and 12" 3D printed fender holder brackets. These implementations do not use the brackets on the axil. The Teverun fender and brackets are unbranded and provides a single, cantered bracket whereas the VSETT has two brackets on each side which makes things a bit busy, obstructs wheel access and I suggest adds weight.