Tuovt 8.5x3 Road Tyre (tube type) [TD-8008]

• The 8.5x3 is a common tyre for 5.5" rims models such as:
  • VSETT 8 front.
  • VSETT 9 and 9+.
  • T8 including ODM's of Zero 8 and Bexly 8.
  • T9 including ODM's of Zero 9, Dragon X9 and Bexly 9.
  • KuKirin G2 Pro and other ODM's Mercane G2 Pro & Veloz G2.
• 134mm (marketed), 132mm (observed) internal diameter. 205mm external diameter (marketed, observed uninflated). Width at bead 37mm.
• Nameplate tyre pressure: 45PSI.
• Typical observed weight: just over 500 grams.

Notes:

1. VSETT / Zero factory pairs these models with HOTA 8.5x2 tube. eSN recommends the AoXin 8.5x3.0 long valve tube on motor hub wheels.
2. TUOVT has been the VSETT and Zero factory tyre since late 2021. Models prior to this were factory fitted with HOTA 8.5x3 (A-3051) which presents similar in tread pattern and of similar 65kgs load rating but are slightly lighter at 414 grams. In addition to being heavier, the TUOVT offers some additional textured tread.
3. Most T8 models (such as Zero 8 & Bexly 8) and select T9 models (such as early Zero 9) were factory fitted with a narrower Zero Branded HOTA 8½x2 tyre [A-3051] on front. T8 rear is 200x60 solid. The front 8½x2 tyre can be upgraded to 8.5x3 in Zero 8 and Zero 9 models (e.g. FalconPEV). MACURY Store, an AliExpress seller states their TUOVT and HOTA will not fit Zero 8 and Zero 9, however this is likely due to the bundled tubes having inappropriate bend/shape. The Zero 8 Pro runs totally different tyres.
4. T8-DDM such as Zero 8X is not supported as they run an 200x90 solid.
5. VSETT 8 rear is 200x60 solid.
6. VSETT 8+ is not supported as they adopt 200x60 solid rear typically also on front (older models may be pneumatic front).
7. Keep tubes inflated at the nameplate 45PSI. Letting pressure drop to <40psi will significantly increase likelihood of pinch punctures with tyres of this size. Most of these models are split rim and relatively easy work on, ensure heat is applied to rim bolts if they are tight to prevent stripping head of bolts.