For less wide tyres, such as 10x3", usually a 10x2.5" tube is fitted.
Suits tubed eScooters such as Mantis 10, VSETT 10+, T10-DDM such as Zero 10 & 10X, Dragon X10 & MiniWalker, VDM-10 such as Bolzzen Dynamo & Gladiator, Dragon Raptor & e-Glide Mach 10, Bolzzen Commando 4822 (1st generation, yellow swing arms) / Dragon Slayer (Hota 80/65-6) and Mukuta (Tuovt 255x80).
Choice of two valve stem, both are reinforced with 60 degree tilt and bend of:
a 90 degree angle, or
45 degree angle.
Note, although the tilt is around 60 degrees, the location of where the valve meets the tube is off-centre 10-15 degrees (visible in product photo's) which results in stem to sit slightly offset with valve protruding perpendicular to side of the wheel. This may be more favourable for some motor hubs.
Available in 90 degree at 130 grams and 45 degree in heavier 180 grams.
Typically with blue line on one side. 130 gram standard has white nameplate 255x80/10X3.0 and mould JY10250275 marking. 180 gram heavy is 255x80/10x3.0 mould nameplate with designation CG-01 (LW-02 or often no identifier).
63mm at bead, 50PSI, suits 6" rims of NAMI Klima and Teverun Fighter Mini (stock tyre), 6" rim models of Dragon Predator & Cyclone and front of Dragon GTR (inc V2).
60mm at bead, 50PSI, optional self-healing liner, suit 6" rims of NAMI Klima, Dragon Raptor, Wolf Warrior X, VSETT 10+ & APEX, Zero 10X, Mukuta 10+, Ausom DT2 Pro and Apollo Phantom V2 & Pro.
75mm at bead, 35PSI, suits 6" rims of NAMI Klima and Teverun Fighter Mini, 6" rim models of Dragon Predator & Cyclone and front of Dragon GTR (inc V2).