The current kits in stock are interim (not complete, but still fit for purpose). They are without the 1.0mm copper flat gasket washer and the 0.5mm and 1.0mm stainless flat washer. These components are expected in the September stock refresh, then likely to be retired due as the recently introduced 0.5mm stainless steel belleville (conical) washer, the ultra thin 0.3mm stainless flat washer and one 0.5mm or 1mm washer will likely be sufficient for most padding purposes. Interim kits are provided with one additional belleville (conical) washer (total qty 2) to substitute the absent stainless flat washers.
This kit makes a significant improvement in reducing stem backlash (wobble) as the factory hinge bolt can disform over time resulting in metal-on-metal creaking sounds and "play" in the hinge. The kit also reduces the frequency of periodic adjustment, holding solid form for longer period.
Refurb your Kaabo Mantis hinge by replacing the stock hinge hardware. Multiple points of improvement:
Thoroughly clean your hinge cavities including countersunk socket thread with a good flush of PTFE before installation of these choice cuts. Do not use oil based lubricants such as standard WD-40 as these will attract foreign materials (e.g. dust and dirt) that will cause premature failure of hardware and introduce squeaking sounds. Don't forget thread locker, such as blue Loctite!
Supports Mantis 8 and 10 series scooters, with double or triple quick lock clamp style hinge (all Mantis other than the King GT).
The kit contains:
1) An M8 (8mm) x 35mm Hardened Alloy Steel Dowel Hinge Pin, featuring:
2) A pair of SF-1 0806 bushing, featuring an 8 x 10 x 6mm sleeve:
3) A M5 10mm Countersunk (conical) socket screw (2mm longer than the stock 8mm):
4) Washers/spacers for padding countersunk socket screw, as required: