TurboCharge Charger 67.2V for 60V GX16-3F 2A [GJS150]

• The TurboCharge Charger 67.2V for 60V GX16-3F 2A [GJS150] is the factory original charger of Dragon, Zero, VSETT & Mukuta and suits most 60 volt eScooters that require the common GX16 3-pin female connector.
• The GX16 3-pin female plug has pin 1 +ve, 3 -ve configuration which is adopted by most makes and models that use this plug including those specified below.
  • If you require the less common negative on pin 2 rather than pin 3, use a Conversion Cable (variant: GX16 3-Pin Female [12] from GX16 3-Pin Male [13]).
• Suits:
  • early Kaabo models with this physical plug including:
    • Mantis 10 60v models such as Duo, Pro and Pro+.
    • Wolf Warrior models such as:
      • Warrior X, Warrior 11 Plus & Pro and GT (non King models),
        • Wolf King and King GT require Charger for 72V.

Newer models with male charger plug require this charger in conjunction with conversion cable (variant: LT 3-pin Male [12] (Kaabo)).

• Select Dragon models:
  • Predator when used in conjunction with conversion cable:
    • 1st generation port (3-pin: 1+ve 2-ve) female charging plug on builds to late 2023 (to VIN DRA23PREDATOR0421) will require conversion cable (variant: GX16 3-Pin Female [12] from GX16 3-Pin Male [13]).
    • 2nd generation port (4-pin) male charging plug on builds from late 2023 (VIN DRA23PREDATOR0421 onwards) will require a 4-pin male connector:
      • this charger in conjunction with conversion cable (variant: YJ20 4-pin Male [12] Dragon 60V Langfeite models (Predator/Lightning V2/Beast)), or
      • 4-pin charger.
  • Lightning V2: 1st generation port (3-pin) across 1st & 2nd gen builds to early 2024 (to VIN DRA24LIGHTNINGV20031).
    • Later models (2nd gen port, 3rd gen model) with 4-pin male plug require:
      • this charger, faster charger, or faster charger with display in conjunction with conversion cable (variant: YJ20 4-pin Male [12] Dragon 60V Langfeite models (Predator/Lightning V2/Beast)), or
      • 4-pin charger.
  • Beast: 1st generation port (3-pin) on builds to early 2024 (to VIN DRA24BEAST0016).
    • Later models (2nd gen port) with 4-pin male plug require:
      • this charger with conversion cable (variant: YJ20 4-pin Male [12] Dragon 60V Langfeite models (Predator/Lightning V2/Beast)), or
      • 4-pin charger.
• Mukuta 10 Plus (Bike Scooter City grey/yellow model).
  • Mukuta 10 Dual (iScoot black model) requires Charger for 52V.
• VSETT 10+, 10 Apex and 11+.
  • VSETT 11+ Super 72 model requires Charger for 72V.
• Zero 10X 60V models such as Limited and other 60V T10-DDM ODM's.
  • Zero 10X 52V models require Charger for 52V.
• 60V models of Apollo Phantom V2 and ODM's such as Bexly Blackhawk (Pro & Pro MAX)
  • Apollo Phantom V2 (base 52V models) and non-Pro models of Blackhawk and Nitro require Charger for 52V.
• Early (pre-2021) builds of Dualtron Ultra, Eagle, Thunder. Later builds and models such as Luxury, Forever and Victor will require a BM 3-pin male conversion cable.
• Inokim OXO.

• "Standard charge" speed, 2 amp.
• Charging status led presents Red = charging, Green = full or disconnect. Silent, fan-less design.
• 100-240 volt input via C8 panel socket, includes Australian 3-pin power cable with C7 female plug.
• Manufactured by Shenzhen Gojusin Technology Co.,Ltd, OEM factory original of Dragon, Zero, VSETT and Mukuta.
• Compliant with Regulatory Compliance Mark (RCM), proof of RCM compliance certificate number: GMA-513229 (to 13/08/27). GJS150-6720200 with Superbsail branding using GJS150-6720175 model designation.
• eSN can check compatibility if you provide details of make/model in comment at checkout.

.