TurboCharge Charger 54.6V for 48V YJ20-4M 2A (Dragon GTS/GTR/Ninja) [XVE126]

• The TurboCharge Charger 54.6V for 48V YJ20-4M 2A (Dragon GTS/GTR/Ninja) [XVE126] is factory fitted with the newer black moulded 4-pin connector to Dragon Ninja and later models of GTS & GTR (including V2).
• If your scooter is one of these makes/models and the charging port looks like this with four pins, this charger will be appropriate.
• Fitted with YJ20 4-pin male plug (as pin 2 +ve, pin 3 -ve).
  
  
• 100-240 volt input via C8 panel socket, includes Australian 3-pin power cable with C7 female plug.
• Charging status led presents Red = charging, Green = full or disconnect.
• Silent, fan-less design.
• Manufactured for eSN by XVE, well known charger manufacturer.
• Compliant with Regulatory Compliance Mark (RCM), proof of RCM compliance certificate number: GMA-511068-EA (to 25/10/26) and subsequent GMA-519079-EA (to 09/06/29)
• For your safety, include your scooter's make / model / serial / voltage and battery Ah capacity as order comment on checkout so that the appropriate voltage can checked to best of our ability as part of order fulfilment. Remember some makes have models that are available in variants that have different voltages and inappropriate selection of higher voltages is a common cause of thermal runway and house fires folks.

Notes:

1. The plug on this charger is the 3rd generation (latest) on Dragon GTR/GTS series. Earlier generations had a 3-pin charging port. 1st generation requires a charger with GX16 3-Pin Female Plug (or this one from GoJusin) and additionally for the 2nd generation (also 3-pin) a conversion cable for 1+ve & 2-ve.
2. You can also use TurboCharge Conversion Cable to convert the older more common GX16 3-Pin to JY20 4-Pin.