For less wide tyres, such as 10x3", usually a 10x2.5" tube is fitted.
Suits tubed eScooters such as Mantis 10, VSETT 10+, T10-DDM such as Zero 10 & 10X, Dragon X10 & MiniWalker, VDM-10 such as Bolzzen Dynamo & Gladiator, Dragon Raptor & e-Glide Mach 10, Bolzzen Commando 4822 (1st generation, yellow swing arms) / Dragon Slayer (Hota 80/65-6) and Mukuta (Tuovt 255x80).
Choice of two valve stem, both are reinforced with 60 degree tilt and bend of:
a 90 degree angle, or
45 degree angle.
Note, although the tilt is around 60 degrees, the location of where the valve meets the tube is off-centre 10-15 degrees (visible in product photo's) which results in stem to sit slightly offset with valve protruding perpendicular to side of the wheel. This may be more favourable for some motor hubs.
Available in standard weight 130 gram or heavy, ultra thickened 180 grams version.
Typically with blue line on one side. Nameplate on heavy is embossed 255x80/10x3.0 with designation CG-01 (LW-02 or often no identifier). Standard has white marking 255x80/10X3.0 and embossed JY10250275 marking.