TurboTouch Spring 35mm Chinese suit Kaabo Mantis / Wolf Warrior X / Dragon Raptor etc

• Replacement 35mm outer diameter springs, manufactured in China.
• 17mm inner diameter accommodates 16mm bush.
• Suits most scooters that adopt a 35mm spring as length requires, such as Kaabo Mantis / Wolf Warrior X / Dragon Raptor etc.
• Supplied individually, order 2PCS for front and rear, or one for each side in Warrior X (dual rear spring).
• Available in 5 weights:

Application guide:

1. Use of petroleum / oil based products is not recommended. eScootNow recommends cleaning bush and spring using a silicone flush (often ~$8 can at ALDI Special Buys) followed by PTFE spray (such as the 300g can from SCA).
2. Note regarding Kaabo models: The Factory Kaabo Mantis Red spring is equivalent to the the Chinese Brown's (effectively brown spring painted red). The Wolf Warrior X had a Brown spring equivalent to these Chinese Brown's.
3. The stock VDM-10 (Dragon Raptor) spring appears to have similar strength to Chinese green, but there can be invariability over time. In general, this model needs a heavier spring than the stock affords to allow rider to apply downforce without "bottoming out".
4. There is some variation amongst Kaabo Wolf Warrior X models, the earlier 45mm spring model (with 30mm bush) and subsequent 50mm spring model (with 35/36mm bushes).
5. You can often get away with a 5mm shorter spring if seeking lower centre of gravity (low-rider).
6. Don't forget to use a medium thread locker (such as Blue Loctite) on the high tensile suspension bolts and pair screws.
7. Wolf Warrior 11/GT series adopt 40mm springs and 20mm bush.