TurboTorch Cobra 3600/M8 Headlight

• Measured on meter to consume 16 watts, delivering 3600lm and will drop back with thermal management.
• Fixture has three CREE XM-L2 emitters at 6000K colour temperature with 70CRI configured as:
  • 2xSpot with 10 degree beam width.
  • 1xWave with 60x15 degree beam width.
• Includes handlebar remote which is secured with a green O ring (three sizes).
• Support wide voltage 12-90V.
• NAMI Plug-and-play, fitted with red 2-pin M8 connector to either replace or compliment stock headlight, powered from headlight circuit or Auxiliary Power Output on TurboTap NFC Bypass Switch.
• Cobra has a mounting plate 9mm wide for an M5 bolt. An optional 40mm mounting kit is available to adapt to 40mm brackets such as the stock headlight holder/brackets from NAMI and Kaabo. The kit converts 40mm to 9mm with hardware comprising of:
  • Bolt: M5x50mm (304 A2-70 stainless)
  • Nut: M5 Bakelite
  • Black ABS spacers: Lengths of 2 x 15mm + a 1 x 12mm for fine tuning (5.2mm inner, 9mm outer diameter)
  • Two washers: 1mm and 0.5mm
  • You can choose option to:
    • Replace the existing headlight, such as those on NAMI or Kaabo and re-use existing NAMI Head Light Holder or Kaabo Bracket with the 40mm mounting kit option, or
    • Add the TurboTorch as an additional light in conjunction with the stock headlight with 40mm mounting kit option and two additional items:
      • NAMI Head Light Holder
      • M8 2 Pin Red Female-2xMale (Y Splitter) Prepared Lead
        

If you require spacers for a different length other than 40mm, please add comment at checkout we will see what we can do. Images below show 9mm to 40mm kit of the TurboTorches and the NAMI headlight and Head Light Holder

• Lightweight: 173 grams

Notes:

1. Compared to TurboTorch Bushmaster, Cobra produces more luminance in the 0-10 degree area and well suited to narrow, long throw due to 2 of 3 emitters being 10 degree spots. Bushmaster has more luminance in the 60x15 degree area.
2. With NAMI systems, as a replacement to the stock NAMI headlight, a slightly different user interface applies. The TurboTorch M8 headlight will not automatically turn on when light switch is on. When the fixture (or remote) button is pressed, the headlight will turn on at full brightness. The same buttons adjust brightness and can turn off the headlight even if the light switch is on. Operation differs if connecting via the TurboTap NFC Bypass Switch with Auxiliary Power Output, which is fully independent of the light switch.
3. Manufactured by Shenzhen Beam-Tech Electronic, ODM brands include ITARLIGHTS and FluxMotion, Belgium. Beam-Tech's products are also supplied as ODM brands in large Australian retail stores.
4. Image shows the wiring configuration adopted on TurboTap M8 and the stock NAMI headlight. The connector can be adopted for other makes in accordance with this wiring configuration.
   
5. Photo's are difficult to assess, here are some of the factory images. First image has fixture pointed down too low but gives indication of the strength of the spot. Second image shows the high beam with the two spots active. Third image is a good one to compare to the similar image on the Bushmaster page, it suggests light (energy) is not wasted in the 10+ degree area . Fourth image shows the slight offset in angle for the high beam.