TurboTread DynoSlick 90/65-6 XLD/XXLD (3.54" 10"+) Semi-Slick Tyre OSH  (tubeless) suit Zero 10X / Dragon X10 [Xuancheng XC-28F 269mm | AoXin P6219 274mm]
+9
+8
+7
+6
+5
+4
+3
+2

TurboTread DynoSlick 90/65-6 XLD/XXLD (3.54" 10"+) Semi-Slick Tyre OSH (tubeless) suit Zero 10X / Dragon X10 [Xuancheng XC-28F 269mm | AoXin P6219 274mm]

Home/Store/eScootNow Originals/TurboTread DynoSlick
SKU TYRE-TTDS-90/65-6-XXL-NSH
AU$50.91
Bulk pricing available for quantities of 2 units or more
Inflates to 10.6/10.8" on most 6" rims
Variant
In stock: 11 available
1
Buy more, save more
QuantityPrice per itemDiscount
2 itemsAU$43.6414% off
5 itemsAU$38.1825% off
10 itemsAU$35.4530% off
Save this product for later
Customer reviews
Reviews only from verified customers
No reviews yet. You can buy this product and be the first to leave a review.
Share this product with your friends
ShareSharePin it
TurboTread DynoSlick 90/65-6 XLD/XXLD (3.54" 10"+) Semi-Slick Tyre OSH (tubeless) suit Zero 10X / Dragon X10 [Xuancheng XC-28F 269mm | AoXin P6219 274mm]
Home/Store/eScootNow Originals/TurboTread DynoSlick
Product Details
Brand: TurboTread by eScootNow

Product images show XXLD variant (AoXin P6219).

  • Race tyre to suit 10" scooters that can accommodate significant clearance as this tyre has a generous /65 profile and expands significantly under inflation, making it significantly larger than the usual 10" tyre.
  • Suits wider (>45mm) 6" rims, width at bead (heel): 65mm.
  • The XLD (Xuancheng XC-28F) variant has slightly smaller diameter, inflates to ~269mm (10.6"), uninflated at 259-262mm.
  • The XXLD (AoXin P6219) has inflated diameter of ~274mm (10.8"), uninflated diameter 263mm,
  • Regarding size:
    • As a general rule of thumb, ~5-9mm additional clearance (radius) is required over most stock /60 profile tyres to fit the larger /65 XXLD profile size. If you can fit your thumb between tyre and spring, the XXLD size may be supported.
    • Typically there is 6mm of centrifugal expansion (radius), beyond uninflated diameter. This is a performance race tyre and the form it takes (shape / size) varies with pressure.
  • Known accommodated makes/models:
    • Many of the Dualtron makes that have good clearance for XXL, you often see them without mudguard.
    • The front end of the Kaabo Wolf Warrior X suits the XXL. XL in rear require investigation, but not the XXL.
    • T10-DDM models including Zero 10X and Dragon Hunter X10, MiniWalker and Black Edition / Bexley equivalents have a bit of room, supporting the XL variant. XXL may require more accommodation (there are variances, work your way up).
    • VSETT 10+ (photos in comment)
    • Both XLD and XXLD are too large to for the Dragon Predator (on the rear will foul on shock in rotation, front will foul on inflation).
    • For Nami Klima, XXL will not fit (shock and fenders) and it is most probable the XL would also be too large, Klima stock tyre is the relatively small CST 10x3.00-6 and available in self-healing version. The ULIP, DynoRoad SHM-U 90/60-6 with spacer kit or PMT e-Fire 10x3.5 R6.0 85/250 R6.0 (10" 10x3.5) are also good high performance options.
    • Kaabo Mantis King GT could investigate XL, but would likely not accommodate as they are relatively compact, as Dragon Lightning V2.
    • Will not suit narrow hubs such as those in Kaabo Mantis 10 series or 35mm wide hubs of the VDM-10 (Dragon Raptor, Bolzzen Dynamo & Gladiator, Carbon Oxy 10 & e-Glide Mach 10), Bolzzen Commando 10" / Dragon Slayer (Hota 80/65-6) and Mukuta (Tuovt 255x80).
      • For those models, consider the smaller DynoRoad 10x3.
    • XXL Will not fit the rear of Elektro Ultra 10 Pro series (fouls on shock), the XL would be marginal.
  • Tyre is relatively wide (despite being a 90/, the width measures 100mm uninflated down to ~90mm inflated dependant on rim width). This makes it demanding on clearance of fenders (especially in the centre due to the round shape) and to a lesser extent callipers and swing arms. Much wider than the 68mm realised on Dualtron and the Dragon Cyclone Pro / Predator models stock size tyres, such as 90/55-6 Tuovt Road and 90/55-6 Tuovt Semi-Off Road.
  • This is a performance road tyre for hard, mostly dry surfaces. Performs well in high-demand environments across cornering, braking and acceleration on predictable, dry blacktop.
  • Semi-slick tread for the ultimate adhesion on hard dry surfaces with a light tread to reduce aquaplaning. Ideal for riders who mostly ride on dry surfaces, but on the occasion may be caught out and need to traverse wet surfaces.
  • Nameplate tyre pressure of "36PSI Cold" with "For Racing Purposes Only - Not For Highway Use" which is a USA NHS DOT compliance marking. The inclusion of these sidewall markings suggest improved handling properties when at temperature and being a mostly slick tread will experience variation in operating pressures.
  • These tyres have a round footprint that is evenly curved similar to PMT tyres and eScootNow TurboTread DynoRoad SHM to provide consistent surface contact and downforce through cornering.
  • Typical weight 1133 grams, 1390 grams on optional self-healing lining version (OSH).
  • The optional factory-fitted self-healing liner (SH) version has a thick internal lining of sticky, tacky ("goo") that can assist seal punctures, also known as "puncture-proof" or "run flat". It has a higher viscosity than liquid sealants and typically will not run and damage hub alloy. SH is recommended if traversing terrain with sharp object debris, such as side of arterial roads or industrial areas. As an alternative for roadside puncture repair, plugs can be considered such as the Dynaplugger from Dynaplug Australia. With SH tyres, the liners add weight to the tyre and can impact balance. Balance can also be impacted if a liner is damaged in production, shipping or fitting. eSN recommends ensuring the liner is not disturbed in fitting and that the tyre once fitted is free-wheeled at high speed to allow centrifugal force to settle the liner before hitting the road. If you are not satisfied with the balance, remove the liner. If needing to fit to tubed hubs, do not use the non-self healing version.
  • These tyres are not a common tyre, XXL OEM factory AoXin P6219, typically has a small logo for Tianjin Wanda Tyre Group Co., Ltd, as made for Wanda and typically with large Wanda lettering, 28F / P-6219 nameplate. The XL version (Xuancheng XC-28F) also has 28F marking, but without P6219 marking and lacks thee tread wear indicator in the gaps that is included in the XXL AoXin mould. Images below shows catalogue images of the XXL AoXin P6219 vs XL Xuancheng XC-28F, the later appears upside down.


  • Nameplate 36PSI Cold (relatively low, and yes it says COLD on the nameplate).
  • You also have length of hook washer to consider, some stock washers are short.
  • In addition to guidance previously mentioned for clearance on this tyre, this tyre is noticeably large as shown in comparative images below, but has a very round (curved) shape which helps clear callipers and sides of fenders (guards). Tyres with this high profile for a 6" rim are relatively rare. Likewise, there are not many tyres with this size diameter that offer a curved shape. Typically 6.5" hubs are required for a tyre nearing this size. This can make compatibility explorative, however this page is updated on discovery of suitability for specific makes/models.

Notes:

  1. XL fitted to Zero 10X



  2. Featured roadie of choice by Scooter Corner, Kent, United Kingdom, images below from contrasting the 6.5" rim version on a Zero 11X with a PMT Stradale 100/55-6.5

  3. Comparative images of CST 10x3.00-6, Tuovt 90/55-6, this tyre (DynoSlick 90/65-6) and PMT e-Fire 75/250R6.0 (10x3).



  4. Image below shows the XL (Xuancheng branded) tyre on the left, compared to the 90/55-6 Tuovt Road, which is a road version of the 90/55-6 Tuovt Semi-Off Road stock on Dragon Cyclone Pro / Predator.
  5. Image below shows XXL on Nami Klima, courtesy Rob Moore with factory stock KKE shocks extended for rider weight preference. Observed "slight rubbing against spring", PSI unknown.

Show More
You May Also Like
2 for $80
Xuancheng  10x3.0 (80/65-6) Road Tyre (tubeless) [DynoRoad XC | X8024]
Xuancheng 10x3.0 (80/65-6) Road Tyre (tubeless) [DynoRoad XC | X8024]
Xuancheng 10x3.0 (80/65-6) Road Tyre (tubeless) [DynoRoad XC | X8024]
Suit 6" rims of Dragon Raptor, Makuta 10+, Kaabo Mantis 10, VSETT 10+, Zero 10X.
AU$45.45
ULIP 90/60-6 Road Tyre (tubeless, OSH) [DynoRoad | HP-1005]
ULIP 90/60-6 Road Tyre (tubeless, OSH) [DynoRoad | HP-1005]
ULIP 90/60-6 Road Tyre (tubeless, OSH) [DynoRoad | HP-1005]
50PSI, width at bead 60mm, optional self-healing, suit 6" rims of NAMI Klima, VSETT 10+, Makuta 10+, Dragon Predator 6" & Zero
AU$63.64
Tubeless Tyre Valve Stem PVR50 for eScooter (90 degree angle bent) 12mm seat
Tubeless Tyre Valve Stem PVR50 for eScooter (90 degree angle bent) 12mm seat
Tubeless Tyre Valve Stem PVR50 for eScooter (90 degree angle bent) 12mm seat
For Tubeless hubs
AU$7.27
Tubeless Tyre Valve Stem (straight) suit eScooter 11mm seat
Tubeless Tyre Valve Stem (straight) suit eScooter 11mm seat
Tubeless Tyre Valve Stem (straight) suit eScooter 11mm seat
For Tubeless hubs
AU$6.36
10x3.0" (255x80) Tube 45/90 degree (Heavy)
10x3.0" (255x80) Tube 45/90 degree (Heavy)
10x3.0" (255x80) Tube 45/90 degree (Heavy)
60 degree tilt, standard 130 or heavy 180 grams, suits 6" rims running 3"+ wide tyres
AU$10.91
2 for $70
80/65-6 {10x3 255x80} Road Tyre (tube type) [Tuovt TD-8008 | Innova IA-1289 | HOTA A-3051]
80/65-6 {10x3 255x80} Road Tyre (tube type) [Tuovt TD-8008 | Innova IA-1289 | HOTA A-3051]
80/65-6 {10x3 255x80} Road Tyre (tube type) [Tuovt TD-8008 | Innova IA-1289 | HOTA A-3051]
50PSI, suits 6" rims such as Zero 10X and Dragon Raptor.
AU$38.18
CST 10x3.00-6 Road Tyre (tubeless) [CM560]
CST 10x3.00-6 Road Tyre (tubeless) [CM560]
CST 10x3.00-6 Road Tyre (tubeless) [CM560]
63mm at bead, 50PSI, red / green line, suits 6" rims of NAMI Klima and Dragon GTR, Cyclone 10" and Predator.
AU$33.64
2 for $76
Tuovt 90/55-6 Road Tyre (tubeless) [TD-8016]
Tuovt 90/55-6 Road Tyre (tubeless) [TD-8016]
Tuovt 90/55-6 Road Tyre (tubeless) [TD-8016]
58mm width at bead, 50PSI, red / yellow line, suits 6" rims of Nami Klima, Dragon GTR inc V2 front and 6" rim versions Predator & Cyclone.
AU$40.91
CST 10x3.00-6 Road Tyre (tubeless, SH) [CM560]
CST 10x3.00-6 Road Tyre (tubeless, SH) [CM560]
CST 10x3.00-6 Road Tyre (tubeless, SH) [CM560]
63mm at bead, 50PSI, with self-healing liner, red / green line, suits 6" rims of NAMI Klima and Dragon GTR, Cyclone 10" and Predator.
AU$40.91
PMT e-Fire 10x3.0 R6.0 75/250 Tyre
PMT e-Fire 10x3.0 R6.0 75/250 Tyre
PMT e-Fire 10x3.0 R6.0 75/250 Tyre
Soft compound, ultimate traction
AU$136.36
PMT e-Fire 10x3.5 R6.0 85/250 Tyre
PMT e-Fire 10x3.5 R6.0 85/250 Tyre
PMT e-Fire 10x3.5 R6.0 85/250 Tyre
Soft compound, ultimate traction
AU$140.91
Tuovt 90/55-6 Semi Off-Road Tyre (tubeless) [TD-8009]
Tuovt 90/55-6 Semi Off-Road Tyre (tubeless) [TD-8009]
Tuovt 90/55-6 Semi Off-Road Tyre (tubeless) [TD-8009]
68mm width at bead, 50PSI, Red/yellow line, suits 6" rim models of Dragon Predator & Cyclone 10" and the front of GTR V2
AU$43.64
Tuovt 90/55-6 Semi Off-Road Tyre (tubeless, SH) [TD-8009]
Tuovt 90/55-6 Semi Off-Road Tyre (tubeless, SH) [TD-8009]
Tuovt 90/55-6 Semi Off-Road Tyre (tubeless, SH) [TD-8009]
68mm width at bead, 50PSI, with self-healing liner, Red/yellow line, suits 6" rim models of Dragon Predator & Cyclone 10" and the front of GTR V2
AU$54.55
TurboTread DynoGrip 10x3.00-6 (80/65-6) Semi Off-Road Tyre (tubeless)  [HT027]
TurboTread DynoGrip 10x3.00-6 (80/65-6) Semi Off-Road Tyre (tubeless) [HT027]
TurboTread DynoGrip 10x3.00-6 (80/65-6) Semi Off-Road Tyre (tubeless) [HT027]
50PSI, red line, suit 6" rims of Dragon GTR (including V2), Dragon Raptor, Makuta 10+, Kaabo Mantis 10, VSETT 10+, Zero 10X.
AU$40.91
Tuovt 10x3 (10") Full Off-Road Tyre (tubeless)
Tuovt 10x3 (10") Full Off-Road Tyre (tubeless)
Tuovt 10x3 (10") Full Off-Road Tyre (tubeless)
The 10x3 tubeless off-roader suits 6" rims
AU$34.55
Kaabo Mantis Washer Kit (M12 Axil Shaft Hook Black) [TurboTight]
Kaabo Mantis Washer Kit (M12 Axil Shaft Hook Black) [TurboTight]
Kaabo Mantis Washer Kit (M12 Axil Shaft Hook Black) [TurboTight]
Complete set of hook washers for Mantis 10 series.
AU$17.27
Kaabo Wolf Motor Washer Kit (M14 Axil Shaft Hook Black) [TurboTight]
Kaabo Wolf Motor Washer Kit (M14 Axil Shaft Hook Black) [TurboTight]
Kaabo Wolf Motor Washer Kit (M14 Axil Shaft Hook Black) [TurboTight]
Complete set of 3-4 types of washers for Warrior 11 and GT.
AU$23.64
Tyre Lever (Tyre Spoon) for eScooter
Tyre Lever (Tyre Spoon) for eScooter
Tyre Lever (Tyre Spoon) for eScooter
Ideal shape for eScooter use
AU$8.64
Air Pump [AP-13 | Xiaomi Mi Mijia Air Pump 2]
Air Pump [AP-13 | Xiaomi Mi Mijia Air Pump 2]
Air Pump [AP-13 | Xiaomi Mi Mijia Air Pump 2]
Maintain optimal inflation with this convenient portable tyre inflator.
AU$71.82
Eelink IoT GPS Tracker [TK418/TK419/TK419-3 | TurboTap]
Eelink IoT GPS Tracker [TK418/TK419/TK419-3 | TurboTap]
Eelink IoT GPS Tracker [TK418/TK419/TK419-3 | TurboTap]
Premium protection with remote immobilisation.
AU$190.91
  • Search Products
  • My Account
  • Track Orders
  • Favorites
  • Shopping Bag
Powered by Lightspeed
Display prices in:AUD
Skip to main content
eScootNow
Google Business Profile & Hours
Menu
Categories
eSN ORIGINALS
TYRES, Tubes & Valves
BRAKE Spares
NAMI Spares
Kaabo Spares
Other Spares
Aftermarkets
Clearance
Services

© 2024 Brendan Hemmings T/A eScootNow ABN: 13 114 749 078

Terms & ConditionsPrivacy PolicyRepair, Replace, Refund & Cancel PolicyReport abuse
Powered by Lightspeed