The Zoom full hydraulic calliper requires a pad that is slightly narrower than this pad which appears identical, however there is typically 0.5mm difference in width.
In order to fit into the Zoom calliper, the pad needs to not exceed width of 30.1mm. As a general rule, only these Zoom branded, retail packaged pads provide assurance of the pad being within that 30.1mm tolerance. The pad compound is organic resin semi-metal and this is the only type produced by Zoom. If you want to run alternative compounds, you will need to shave down approx 0.4mm on each side to reduce the width of the plate of the Shimano B01S/M315 / XOD size pad. To further understand merits of each compound, refer to the Brake Pads Category homepage.
This image from an AliExpress seller shows various Zoom branded pads, suggesting this pad is DB-03 designation, although compatible callipers has no relation Zoom callipers on eScooters. The callipers DB680 and DB330/331 are all cable brake systems.
Here are some photos of inappropriate "Crown" shaped pads pulled out of a Zoom hydraulic calliper in a Wolf Warrior King GT Calliper after 1000kms. It is not recommended to this pad in Zoom callipers. The "Crown" Pad is often described as suitable for VSETT 10+ (Ride Electric) and VSETT and other Zoom models (Bike Scooter City), while they support the width of Zoom calliper, they have less depth which may result in only part of the pad surface engaging to the disc rotor, impacting performance and longevity. This is explained further on the Crown product page. There are a lot of pads out there in the field that aren't appropriate and don't assume the pad in your scooter is the correct one - check yours!!!
You can appreciate the outcome of prolonged use of inappropriate pad, as shown below on NAMI Burn-E 2 (Non-Max with Logan 2-piston calliper). Again, the Crown pads, this calliper should be fitted with Shimano B01S/M315 / XOD.
Videos showing how to change pads on the Zoom calliper, here on VSETT 10+