TurboCharge Charger 58.8V for 52V YJ20-4M 2A (Dragon Cyclone 10" inc Pro & Scorpion) [XVE126]

• The TurboCharge Charger 58.8V for 52V YJ20-4M 2A (Dragon Cyclone 10" inc Pro & Scorpion) [XVE126] is factory fitted with the newer black moulded 4-pin connector for 10" (52V) models of Dragon Cyclone (including Cyclone Pro) and Dragon Scorpion.
• If your scooter is one of these makes/models and the charging port looks like this with four pins, this charger will be appropriate.
• Fitted with YJ20 4-pin male plug (as pin 2 +ve, pin 4 -ve).
  
• 100-240 volt input via C8 panel socket, includes Australian 3-pin power cable with C7 female plug.
• Charging status led presents Red = charging, Green = full or disconnect.
• Silent, fan-less design.
• Manufactured for eSN by XVE, well known charger manufacturer.
• Compliant with Regulatory Compliance Mark (RCM), proof of RCM compliance certificate number: GMA-511068-EA (to 25/10/26) and subsequent GMA-519079-EA (to 09/06/29)
• For your safety, include your scooter's make / model / serial / voltage and battery Ah capacity as order comment on checkout so that the appropriate voltage can checked to best of our ability as part of order fulfilment. Remember some makes have models that are available in variants that have different voltages and inappropriate selection of higher voltages is a common cause of thermal runway and house fires folks.

Notes:

1. The plug on this charger is the 2rd generation (latest) on Dragon Cyclone series. 1st generation had a 3-pin charging port (noticeably different) requiring a charger with GX16 3-Pin Female Plug. 1st gen models include Cyclone (single motor) to (and including) VIN DRA24CYCLONE0001-240 and Cyclone Pro (dual motor) DRA24CYCLONEPRO0001-0480.
2. You can also use TurboCharge Conversion Cable to convert the older more common GX16 3-Pin to JY20 4-Pin.