Tuovt 90/55-6 Semi Off-Road Tyre (tubeless) [TD-8009]

• Semi Off-Road tyre suit most full-size / full profile 10" scooters with wider 6" tubeless rim. Suits:
  • NAMI Klima
  • Front of Dragon GTR including V2 (will not suit rear as insufficient clearance on shock near shock shaft).
  • This is the stock tyre on 6"rim models of Dragon Predator and Dragon Cyclone 10/Pro (occasionally amongst these models there is no self healing in original tyre), for 6.5" rim models consider Tuovt 90/55-6.5.
  • Suits tubed hubs such as on Dragon GTS (non split rim) including V2, (potentially) Kaabo Mantis 10 and Wolf Warrior X, VSETT 10+, T10-DDM such as Zero 10 & 10X, Dragon X10 & MiniWalker.
• Will fit on Kaabo Mantis 10 series - clears but is close to swing arms and the valve hole as internal diameter is a relatively small. Ensure your pair screws are straight and you will clear.
• This tyre will not suit narrower split rims such as those on VDM-10 (Bolzzen Dynamo & Gladiator, Dragon Raptor & e-Glide Mach 10 - thanks to Ipswich Scooter Repairs for advising that one), a more clearance performance would be CST 10x3.00-6 "Performance Road".
• Unknown if will fit within Bolzzen Commando 10" / Dragon Slayer (Hota 80/65-6) and Mukuta (Tuovt 255x80).
• This tyre will not suit narrower split rims such as those on VDM-10 (Bolzzen Dynamo & Gladiator, Dragon Raptor & e-Glide Mach 10 - thanks to Ipswich Scooter Repairs for advising that one) although alternative fitting techniques may enable fitting, for a smaller performance tyre consider CST 10x3.00-6 "Performance Road".
• This is the stock 6" rim Dragon Cyclone (10") / Cyclone Pro OEM factory tyre. It has a slightly smaller treaded height than the tubed Tuovt 255x80 (10x3 10") Semi Off-Road.
• Semi off-road tread pattern that adopts the newer urban style footprint that is becoming factory standard for general purpose urban use. This tyre is relatively quiet and low on friction with smaller gaps between tread than more traditional semi off-roads which are more aggressive such as the Tuovt 255x80 (10x3). It maintains a relatively rounded contact surface area (footprint) to assist cornering response, while providing some reasonable tread to assist the tyre to maintain traction on terrain such as wet grass. Medium tread height (3.5mm).
• Width at bead is approximately 68mm (which is slightly wider than the CST with or without self healing and identical to the CST 3.50-6. Inflated diameter of approximately 252mm.
• Typical weight 900 grams which is heavy for a 10" tyre. eScootNow also offers the CST 10x3.00-6 Performance Road as a higher performance alternative for more demanding road environment applications, which is the ultimate Chinese nylon roadie available.
• Red / Yellow line. Tubeless/vacuum.
• Tuovt brand. Nameplate 50PSI, designation TD-8009.

Notes:

1. Product image shows tyre fitted with factory self healing liner - for this version see this product variant.
2. Typically interchangeable with other 10x3 sizes on 6" rim including 80/65-6 and 255x80. eScootNow also stocks DynoGrip 10x3.00-6 (10x3 compatible 80/65-6 10") Semi Off-Road Pneumatic Tyre (Red line, tubeless/vacuum) as an in-house alternative from the TurboTread range - that alternative is a slightly narrower tyre has a smaller footprint to reduce resistance on hard surfaces, and is more rounded (curved) to assist cornering response.
3. These tyres have been observed on a few occasions to "bubble" under high heat, whereby the tyre deforms under sustained high-demand use on hard surfaces. This is due to excessive heat. The bubble is observed amongst models that have high current controllers, with relatively light motors such as Dragon Predator.

Comparative images of four eScootNow's high-end tubeless tyres for 6.0" rims.

CST 10x3.00-6, Tuovt 90/55-6, DynoSlick 90/65-6 and PMT e-Fire 75/250R6.0 (10x3).

Image shows fitted to Dragon Cyclone (10 inch model, specifically the non-Pro single motor model, all 10" models adopt the same size hub).
First image shows stock semi off-road on front (this tyre), second image shows road tyre on rear. Note the AAA battery clearance is insufficient which prevents larger tyres being fitted, especially on front. 90x0.55 = 49.5mm profile..