Tuovt 90/55-6 Semi Off-Road Tyre (tubeless, SH) [TD-8009]

• Semi Off-Road tyre with self-healing liner suit most full-size / full profile 10" scooters with wider 6" tubeless rim. Suits NAMI Klima and Dragon GTR including V2. This is the stock tyre on earlier (typically pre-Q3 2024 models) of Dragon Predator and Dragon Cyclone 10/Pro (occasionally amongst these models there is no self healing in original tyre), for 6.5" rim models consider Tuovt 90/55-6.5.
• Will fit on Kaabo Mantis 10 series - clears but is close to swing arms and the valve hole as internal diameter is a relatively small. Ensure your pair screws are straight and you will clear.
• This tyre will not suit narrower split rims such as those on VDM-10 (Bolzzen Dynamo & Gladiator, Dragon Raptor & e-Glide Mach 10 - thanks to Ipswich Scooter Repairs for advising that one), a more clearance performance would be CST 10x3.00-6 "Performance Road".
• Semi off-road tread pattern that adopts the newer urban style footprint that is becoming factory standard for general purpose urban use. This tyre is relatively quiet and low on friction with smaller gaps between tread than more traditional semi off-roads which are more aggressive such as the tubed Tuovt 255x80 (10x3). It maintains a relatively rounded contact surface area (footprint) to assist cornering response, while providing some reasonable tread to assist the tyre to maintain traction on terrain such as wet grass. Medium tread height (3.5mm).
• Typical weight 1124 grams (with self healing liner) which is heavy for a 10" tyre. eScootNow also offers the CST 10x3.00-6 Performance Road as a higher performance alternative for more demanding road environment applications.
• The self-healing lining is a thick lining of sticky stuff ("goo") that can assist seal punctures, also known as "puncture-proof" or "run flat". It has a higher viscosity than liquid sealants and typically will not run and damage hub alloy. Also offered in non self-healing variant.
• Red / Yellow line. Tubeless.
• Width at bead is approximately 68mm. Inflated diameter of approximately 252mm.
• Tuovt brand. Nameplate 50PSI, designation TD-8009.
• Typically interchangeable with other 10x3 sizes on 6" rim including 80/65-6 and 255x80. eScootNow also stocks DynoGrip 10x3.00-6 (10x3 compatible 80/65-6 10") Semi Off-Road Pneumatic Tyre (Red line, tubeless/vacuum) as an in-house alternative from the TurboTread range - that alternative is a slightly narrower tyre has a smaller footprint to reduce resistance on hard surfaces, and is more rounded (curved) to assist cornering response.
• These tyres have been observed on a few occasions to "bubble" under high heat, whereby the tyre deforms under sustained high-demand use on hard surfaces. This is due to excessive heat. The bubble is observed amongst models that have high current controllers, with relatively light motors such as Dragon Predator.

Image shows Tuovt 90/55-6 fitted to Dragon Cyclone (10 inch model, specifically the non-Pro single motor model, all 10" models adopt the same size hub).
First image shows stock semi off-road on front (this tyre), second image shows road tyre on rear. Note the AAA battery clearance is insufficient which prevents larger tyres being fitted, especially on front. 90x0.55 = 49.5mm profile..