Trading exclusively for Now Club members | eSN2026#JP-CN | eCruzn Group Rides | Workshops: BSG / On The Run / Ride Electric / Speedy / Baringa Bikes / EVA Motors Mackay / MESM Melbourne / Scooteroo Perth | eSN Operational Dashboard:
Kaabo Controller 60V 25A K1 V2 {LT01 & CM06-K1} (select Mantis 10 Plus)
SKU K-CONT-60V-25A-K1-V2/A-REAR-03.D.06023
AU$140.91
Type
Suits Mantis 10 Plus ~2022-2024, White JST XH, Sine Wave.
In stock: 5 available
1
Save this product for later
Customer reviews
Reviews only from verified customers
No reviews yet. You can buy this product and be the first to leave a review.
Kaabo Controller 60V 25A K1 V2 {LT01 & CM06-K1} (select Mantis 10 Plus)
Product Details
Brand: Kaabo
- The Kaabo Controller 60V 25A K1 V2 {LT01 & CM06-K1} (suit select Mantis 10) is the factory stock controller on Kaabo Mantis 10 models circa 2022 through to 2024. Those models introduced a headlight on the stem and retained badge designation of "Plus" and marketing name of "Duo" (for dual motor) to differentiate it from the Mantis 10 PRO+ model which has the MiniMotors controller.
- This "V2" version has white JST XH connectors which connect to the hub / wire collection board. The predecessor controller is the V1 version has black JST SM connectors and is without hub / wire collection board (V1 controller wires connect directly to the main lines). Both versions use K1 (signalling) protocol and the are typically accompanied with the LT01 display/throttle. Both versions are legacy with the transition to the K2 protocol controller in 2025 which is usually accompanied with the CM06-K2 Kaabo Display.
- Commonly required to due to damage from water ingress and/or MOSFET damage which can result in resistance on wheel when attempting to freewheel by hand when controller is connected.
- Supplied individually, order both A (Rear) and B (Front) for both front and rear controllers.
Notes:
- Some controllers (across both V1 and V2) have presence of a relatively thick gauge black wire with a gold bullet connector that is used to interconnect the two controllers (A+B) as a method of grounding/earth. If these wires are present on both controllers, connect these together. Leave unutilised if not present on one or both of the controllers. It is also often observed across V2 controller models with hub / wire collection board that a smaller gauge black wire runs from the hub / wire collection board to the underside of deck screw, assumed for similar grounding purpose.
- Refer to eSN Kaabo Reference Materials page for further information including wiring diagrams and other helpful resources such as this relevant image (Sinewave/LT01 pinouts of version 1 Black JST).
You May Also Like
Kaabo LT01 Display/Throttle Finger (suit select Mantis & Wolf)
Kaabo LT01 Display/Throttle Finger (suit select Mantis & Wolf)
Suit Mantis 8/10 (non-Pro/SE/Elite), Wolf Warrior 11 Plus and X Plus.
AU$83.64
Wire Collection Board / Hub suit Kaabo Mantis and Wolf Warrior (HUB-1)
Wire Collection Board / Hub suit Kaabo Mantis and Wolf Warrior (HUB-1)
Accommodates white XH/XHB connectors
AU$38.18
Kaabo Controller 60V 25A K1 V1 {LT01 & CM06-K1} (select Mantis 10 Plus)
Kaabo Controller 60V 25A K1 V1 {LT01 & CM06-K1} (select Mantis 10 Plus)
Suits Mantis 10 Plus prior to 2022, Black JST SM, Sine Wave.
AU$140.91
Kaabo Controller 60V 2x27A V1 {EY3} (select Mantis 10 inc PRO+)
Kaabo Controller 60V 2x27A V1 {EY3} (select Mantis 10 inc PRO+)
Suits Mantis 10 PRO+ prior to 2022, Black JST SM, MiniMotors Square Wave.
AU$268.18
Kaabo Controller 60V 2x27A V2 {EY3} (select Mantis 10 inc PRO+ / Wolf Warrior X PRO+)
Kaabo Controller 60V 2x27A V2 {EY3} (select Mantis 10 inc PRO+ / Wolf Warrior X PRO+)
Suits Mantis 10 PRO+ 2022 onwards & select Plus inc "V2 2025", White JST XH, MiniMotors Square Wave.
AU$268.18
Kaabo Controller 60V 25A K2 {KM03 & CM06-K2} (Mantis 10 Central Display)
Kaabo Controller 60V 25A K2 {KM03 & CM06-K2} (Mantis 10 Central Display)
Suits Central Display equipped models of Mantis 10 Plus & PRO.
AU$152.73
TurboBrake Ball Bearing Renewal Kit for CNC Brake Lever
TurboBrake Ball Bearing Renewal Kit for CNC Brake Lever
Renews bearings in the TurboBrake CNC Ball Bearing Lever.
AU$20.00
![145mm Brake Disc Rotor Round [Kaabo 2mm]](https://d2j6dbq0eux0bg.cloudfront.net/images/60508924/products/509310620/5038233847.jpg "145mm Brake Disc Rotor Round [Kaabo 2mm]")
145mm Brake Disc Rotor Round [Kaabo 2mm]
145mm Brake Disc Rotor Round [Kaabo 2mm]
Suits early model Kaabo Wolf Warrior 11, hydraulic models of Zero 10X and VSETT 10+.
AU$16.36
Pre-order
NAMI Steering Damper (suit Klima)
NAMI Steering Damper (suit Klima)
Improves stability and ride handling
AU$222.73
NAMI Klima Controller 2400-A / 2400-B
NAMI Klima Controller 2400-A / 2400-B
60V, 40A, suits all Klima models except SE
AU$127.27
![Chao Yang 80/60-6 Semi Off-Road Tyre (tubeless) [H-860]](https://d2j6dbq0eux0bg.cloudfront.net/images/60508924/products/507481186/3309594892.jpg "Chao Yang 80/60-6 Semi Off-Road Tyre (tubeless) [H-860]")
Chao Yang 80/60-6 Semi Off-Road Tyre (tubeless) [H-860]
Chao Yang 80/60-6 Semi Off-Road Tyre (tubeless) [H-860]
75mm at bead, 41PSI, suits 6" rims of Dragon GTR (stock tyre).
AU$43.64
Display prices in:AUD
