eSN is closed for eSN2026#JP-CN mission to Japan/China March 2026 - Order fulfilment resumes 16th March | Now Club | Group Ride Guide | Workshops: BSG / On The Run
Kaabo Controller 60V 25A K1 V1 {LT01 & CM06-K1} (select Mantis 10 Plus)
SKU K-CONT-60V-25A-K1-V1/A-REAR
AU$140.91
Suits Mantis 10 Plus prior to 2022, Black JST SM, Sine Wave.
Type
In stock: 3 available
1
Save this product for later
Customer reviews
Reviews only from verified customers
No reviews yet. You can buy this product and be the first to leave a review.
Kaabo Controller 60V 25A K1 V1 {LT01 & CM06-K1} (select Mantis 10 Plus)
Product Details
Brand: Kaabo
- The Kaabo Controller 60V 25A K1 V1 {LT01 & CM06-K1} (suit select Mantis 10) is the factory stock controller on inaugural Kaabo Mantis 10 models, those prior to 2022. These models were without a headlight on the stem (and associated 3-pin yellow M8 plug) and were the inaugural "Plus" badge models often marketed in Australia as "Duo" (for dual motor) to differentiate it from the Mantis 10 PRO+ model which has the MiniMotors controller.
- This "V1" version is a legacy controller with black JST SM connectors which connect directly to the main lines. The subsequent V2 version controllers have white JST XH connectors which connect to the hub / wire collection board. Both versions use K1 (signalling) protocol and the are typically accompanied with the LT01 display/throttle. Both versions are legacy with the transition to the K2 protocol controller in 2025 which is usually accompanied with the CM06-K2 Kaabo Display (NFC).
- Commonly required to due to damage from water ingress and/or MOSFET damage which can result in resistance on wheel when attempting to freewheel by hand when controller is connected.
- Supplied individually, order both A (Rear) and B (Front) for both front and rear controllers.
Notes:
- Refer to Reference Materials for Kaabo Page for technical info including wiring diagram guidance.
- Some controllers (across both V1 and V2) have presence of a relatively thick gauge black wire with a gold bullet connector that is used to interconnect the two controllers (A+B) as a method of grounding/earth. If these wires are present on both controllers, connect these together. Leave unutilised if not present on one or both of the controllers.
You May Also Like
Kaabo LT01 Display/Throttle Finger (suit select Mantis & Wolf)
Kaabo LT01 Display/Throttle Finger (suit select Mantis & Wolf)
Suit Mantis 8/10 (non-Pro/SE/Elite), Wolf Warrior 11 Plus and X Plus.
AU$83.64
Kaabo Controller 60V 25A K1 V2 {LT01 & CM06-K1} (select Mantis 10 Plus)
Kaabo Controller 60V 25A K1 V2 {LT01 & CM06-K1} (select Mantis 10 Plus)
Suits Mantis 10 Plus ~2022-2024, White JST XH, Sine Wave.
AU$140.91
Kaabo Controller 60V 2x27A V1 {EY3} (select Mantis 10 inc PRO+)
Kaabo Controller 60V 2x27A V1 {EY3} (select Mantis 10 inc PRO+)
Suits Mantis 10 PRO+ prior to 2022, Black JST SM, MiniMotors Square Wave.
AU$268.18
Kaabo Controller 60V 2x27A V2 {EY3} (select Mantis 10 inc PRO+ / Wolf Warrior X PRO+)
Kaabo Controller 60V 2x27A V2 {EY3} (select Mantis 10 inc PRO+ / Wolf Warrior X PRO+)
Suits Mantis 10 PRO+ 2022 onwards & select Plus inc "V2 2025", White JST XH, MiniMotors Square Wave.
AU$268.18
Kaabo Controller 60V 25A K2 {KM03 & CM06-K2} (Mantis 10 Central Display)
Kaabo Controller 60V 25A K2 {KM03 & CM06-K2} (Mantis 10 Central Display)
Suits Central Display equipped models of Mantis 10 Plus & PRO.
AU$152.73
Restocking June 26
![TurboTouch 16mm Suspension Damper Bush [Kaabo | FIBRO]](https://d2j6dbq0eux0bg.cloudfront.net/images/60508924/5038246656.jpg "TurboTouch 16mm Suspension Damper Bush [Kaabo | FIBRO]")
TurboTouch 16mm Suspension Damper Bush [Kaabo | FIBRO]
TurboTouch 16mm Suspension Damper Bush [Kaabo | FIBRO]
Chinese and German suspension bush suit Kaabo Mantis & Wolf Warrior X and VDM-10 models such as Dragon Raptor.
AU$10.91
TurboTool Hook Wrench C Spanner 45-52mm suit eScooter Suspension
TurboTool Hook Wrench C Spanner 45-52mm suit eScooter Suspension
Adjusts suspension pre-load.
AU$25.45
TurboTight Wedge Washer Series (Locking Washers)
TurboTight Wedge Washer Series (Locking Washers)
Helps prevent bolts loosing tension - great for stem.
AU$1.82
eSN2026#JP-CN
TurboBrake FlexiHose with Banjo suit HB427-4M Calliper (Conversion)
TurboBrake FlexiHose with Banjo suit HB427-4M Calliper (Conversion)
Allows routing of hydraulic line on the outer side of calliper via Banjo Bolt.
AU$40.00
Rear Plate (footrest) (suit VDM-10 Dragon Raptor etc.)
Rear Plate (footrest) (suit VDM-10 Dragon Raptor etc.)
Plastic plate. Also suits VDM-10 ODM's Apollo Ghost & Carbon Oxy.
AU$31.82
Display prices in:AUD
