Home/Store/Kaabo Spares/Kaabo Controllers, Main Lines & Wiring Hub
Kaabo Controller 60V 25A K1 V2 {LT01 & CM06-K1} (select Mantis 10 Plus)

Kaabo Controller 60V 25A K1 V2 {LT01 & CM06-K1} (select Mantis 10 Plus)

SKU K-CONT-60V-25A-K1-V2/A-REAR-03.D.06023
AU$140.91
Type
Suits Mantis 10 Plus ~2022-2024, White JST XH, Sine Wave.
In stock: 3 available
1
Save this product for later
Customer reviews
Reviews only from verified customers
No reviews yet. You can buy this product and be the first to leave a review.
Kaabo Controller 60V 25A K1 V2 {LT01 & CM06-K1} (select Mantis 10 Plus)
Product Details
Brand: Kaabo
  • The Kaabo Controller 60V 25A K1 V2 {LT01 & CM06-K1} (suit select Mantis 10) is the factory stock controller on Kaabo Mantis 10 models circa 2022 through to 2024. Those models introduced a headlight on the stem and retained badge designation of "Plus" and marketing name of "Duo" (for dual motor) to differentiate it from the Mantis 10 PRO+ model which has the MiniMotors controller.
  • This "V2" version has white JST XH connectors which connect to the hub / wire collection board. The predecessor controller is the V1 version has black JST SM connectors and is without hub / wire collection board (V1 controller wires connect directly to the main lines). Both versions use K1 (signalling) protocol and the are typically accompanied with the LT01 display/throttle. Both versions are legacy with the transition to the K2 protocol controller in 2025 which is usually accompanied with the CM06-K2 Kaabo Display.
  • Commonly required to due to damage from water ingress and/or MOSFET damage which can result in resistance on wheel when attempting to freewheel by hand when controller is connected.
  • Supplied individually, order both A (Rear) and B (Front) for both front and rear controllers.

Notes:

  1. Some controllers (across both V1 and V2) have presence of a relatively thick gauge black wire with a gold bullet connector that is used to interconnect the two controllers (A+B) as a method of grounding/earth. If these wires are present on both controllers, connect these together. Leave unutilised if not present on one or both of the controllers. It is also often observed across V2 controller models with hub / wire collection board that a smaller gauge black wire runs from the hub / wire collection board to the underside of deck screw, assumed for similar grounding purpose.
  2. Refer to eSN Kaabo Reference Materials page for further information including wiring diagrams and other helpful resources such as this relevant image (Sinewave/LT01 pinouts of version 1 Black JST).

Show More
You May Also Like
Kaabo LT01 Display/Throttle Finger (suit select Mantis & Wolf)Kaabo LT01 Display/Throttle Finger (suit select Mantis & Wolf)
Kaabo LT01 Display/Throttle Finger (suit select Mantis & Wolf)
Kaabo LT01 Display/Throttle Finger (suit select Mantis & Wolf)
Suit Mantis 8/10 (non-Pro/SE/Elite), Wolf Warrior 11 Plus and X Plus.
AU$71.82
Wire Collection Board / Hub suit Kaabo Mantis and Wolf Warrior (HUB-1)Wire Collection Board / Hub suit Kaabo Mantis and Wolf Warrior (HUB-1)
Wire Collection Board / Hub suit Kaabo Mantis and Wolf Warrior (HUB-1)
Wire Collection Board / Hub suit Kaabo Mantis and Wolf Warrior (HUB-1)
Accommodates white XH/XHB connectors
AU$41.82
Kaabo Controller 60V 25A K1 V1 {LT01 & CM06-K1} (select Mantis 10 Plus)Kaabo Controller 60V 25A K1 V1 {LT01 & CM06-K1} (select Mantis 10 Plus)
Kaabo Controller 60V 25A K1 V1 {LT01 & CM06-K1} (select Mantis 10 Plus)
Kaabo Controller 60V 25A K1 V1 {LT01 & CM06-K1} (select Mantis 10 Plus)
Suits Mantis 10 Plus prior to 2022, Black JST SM, Sine Wave.
AU$140.91
Sold out
Kaabo Controller 60V 2x27A V1 {EY3 Minimotors} (select Mantis 10 inc PRO+)
Kaabo Controller 60V 2x27A V1 {EY3 Minimotors} (select Mantis 10 inc PRO+)
Kaabo Controller 60V 2x27A V1 {EY3 Minimotors} (select Mantis 10 inc PRO+)
Suits Mantis 10 PRO+ prior to 2022, Black JST SM, MiniMotors Square Wave.
AU$268.18
Sold out
Kaabo Controller 60V 2x27A V2 {EY3 Minimotors} (select Mantis 10 inc PRO+ / Wolf Warrior X PRO+)Kaabo Controller 60V 2x27A V2 {EY3 Minimotors} (select Mantis 10 inc PRO+ / Wolf Warrior X PRO+)
Kaabo Controller 60V 2x27A V2 {EY3 Minimotors} (select Mantis 10 inc PRO+ / Wolf Warrior X PRO+)
Kaabo Controller 60V 2x27A V2 {EY3 Minimotors} (select Mantis 10 inc PRO+ / Wolf Warrior X PRO+)
Suits Mantis 10 PRO+ 2022 onwards & select Plus inc "V2 2025", White JST XH, MiniMotors Square Wave.
AU$313.64
Kaabo Controller 60V 25A K2 {KM03 & CM06-K2} (select Mantis 10 Pro)Kaabo Controller 60V 25A K2 {KM03 & CM06-K2} (select Mantis 10 Pro)
Kaabo Controller 60V 25A K2 {KM03 & CM06-K2} (select Mantis 10 Pro)
Kaabo Controller 60V 25A K2 {KM03 & CM06-K2} (select Mantis 10 Pro)
Suits Mantis 10 Pro select models 2025 onwards w/ KM03 Central Display.
AU$152.73
Kaabo NFC Display/Throttle (suit select Mantis & Wolf) [CM06: K1 | K2]Kaabo NFC Display/Throttle (suit select Mantis & Wolf) [CM06: K1 | K2]
Kaabo NFC Display/Throttle (suit select Mantis & Wolf) [CM06: K1 | K2]
Kaabo NFC Display/Throttle (suit select Mantis & Wolf) [CM06: K1 | K2]
1.8, LCD, square screen. K1 for LT01 retrofit, K2 for newer builds.
AU$170.91
Clearance
THH T710X Full Face Helmet in Pink/BlueTHH T710X Full Face Helmet in Pink/Blue
THH T710X Full Face Helmet in Pink/Blue
THH T710X Full Face Helmet in Pink/Blue
Full Face Motocross Helmet
was AU$117.27
Save 62%
AU$44.55
TurboTap NFC Bypass Switch for NAMITurboTap NFC Bypass Switch for NAMI
TurboTap NFC Bypass Switch for NAMI
TurboTap NFC Bypass Switch for NAMI
Replaces or compliments NFC Card reader. Allows second headlight to be fitted.
AU$36.36
90/55-6 Road Tyre (tubeless) [Tuovt TD-8016 | Xuancheng TH-018]90/55-6 Road Tyre (tubeless) [Tuovt TD-8016 | Xuancheng TH-018]
90/55-6 Road Tyre (tubeless) [Tuovt TD-8016 | Xuancheng TH-018]
90/55-6 Road Tyre (tubeless) [Tuovt TD-8016 | Xuancheng TH-018]
68mm at bead, 50PSI, suits 6" rim models of Dragon Predator & Cyclone, NAMI Klima and front of Dragon GTR (inc V2).
AU$35.45
Gspace Venus Factory charger 2A suit G15 Commander
Gspace Venus Factory charger 2A suit G15 Commander
Gspace Venus Factory charger 2A suit G15 Commander
AU$71.82
Standard Folding Stem Clamp with Quick Release Locks (suit VDM-10 Dragon Raptor / T10-DDM Zero 10X / X11-DDM Zero 11X)Standard Folding Stem Clamp with Quick Release Locks (suit VDM-10 Dragon Raptor / T10-DDM Zero 10X / X11-DDM Zero 11X)
Standard Folding Stem Clamp with Quick Release Locks (suit VDM-10 Dragon Raptor / T10-DDM Zero 10X / X11-DDM Zero 11X)
Standard Folding Stem Clamp with Quick Release Locks (suit VDM-10 Dragon Raptor / T10-DDM Zero 10X / X11-DDM Zero 11X)
Also suits VDM-10 ODM's Apollo Ghost & Carbon Oxy, DDM-10: Dragon Hunter X10 & X11-DDM: Dragon X11.
AU$35.45
  • Search Products
  • My Account
  • Track Orders
  • Favorites
  • Shopping Bag
Display prices in:AUD
Skip to main content

Now Club | Workshops | eSN2026#JP-CN | eCruzn Group Rides | eSN Operational Dashboard:

🟢 Order Fulfilment: Responsive
eScootNow
Google Business Profile & Hours
Menu
eSN Originals
NAMI OEM Spares
Kaabo OEM Spares
Other OEM Spares
Tyres & Brakes
Everything else
▶️Socials
Contact

© 2026 Brendan Hemmings T/A eScootNow ABN: 13 114 749 078

Terms & ConditionsPrivacy PolicyRepair, Replace, Refund & Cancel PolicyReport Abuse
Powered by Lightspeed