Kaabo Controller 60V 2x27A V1 {EY3 Minimotors} (select Mantis 10 inc PRO+)

• The Kaabo Controller 60V 2x27A V1 {EY3 Minimotors} (select Mantis 10 inc PRO+) is the factory stock controller on inaugural Kaabo Mantis 10 PRO+ models, those prior to 2022. These models have a Minimotors EY3 display/throttle and are without hub / wire collection board.

• This "V1" version is a legacy controller with black JST SM connectors which connect directly to the main lines. The subsequent V2 version controllers have white JST XH connectors which connect to the hub / wire collection board. Both versions use MiniMotors (signalling) protocol and the are typically accompanied with the MiniMotors EY3 display/throttle.
• Commonly required to due to damage from water ingress and/or MOSFET damage which can result in resistance on wheel when attempting to freewheel by hand when controller is connected.
• Often referred to as a "2-in-1" as it is a dual motor controller (for both wheels).

Notes:

1. Refer to Reference Materials for Kaabo Page for technical info including wiring diagram guidance.