NAMI NFC (suit Burn-e, Klima and Blast)

• The Near Field Communication (NFC) card reader is "tapped" with included to provide a proximity security lock to power on/off all NFC enabled* NAMI Electric models of Burn-e, Klima and Blast.
• The current version (Q4 2024) includes the Cable Holder, pre-mounted via an M3 6mm socket head screw (A2-70 stainless). The holder is also used to mount the V3 Main Cable junction which is stock on the Front Turn Signal models. The cable colder clamps with the included 2 pcs of M3 12mm socket head screws (A2-70 stainless).
• Typically required when replacement is needed due to failure of original unit. It can be common for these to fail prematurely, particularly the earlier versions, the newer Q4 2024 tends to be more reliable.
• Genuine NAMI Factory Spare, wired for plug-and-play installation.

Notes:

1. Not suitable for NAMI Stellar series as they have NFC built-in to Dashboard (display).
2. NFC enabled models feature a V2 or V3 Main Cable (and equipped with NFC reader). If intending to retrofit a NFC reader to a non-NFC enabled version (typically most pre-2025 models), you will require a V2 or V3 NFC Main Cable and corresponding NFC enabled Dashboard that supports the power ON / OFF switching for NFC.
3. The factory has had three versions, the earlier two versions are discontinued.
   1. Pre-2024 Q3 (~August) NAMI NFC models were inaugural units were the type that had a white light at bottom and two ordinary rectangular cards.
      
   2. In 2024 Q3, NAMI adopted a different unit, not NAMI branded, with a noticeably different enclosure (it is not as tall), with a blue light top left and three cards (two ordinary rectangular with introduction of one round Super Card). This unit is similar to that adopted by Teverun.
      
   3. The 2024 Q4 is the latest / current model. Includes two rectangular cards. Adopts a 6 side shape with embossed NAMI branding. Mounts via the Cable Holder (mounting bracket) with M3 6mm socket head screw.
      
      
      
4. eSN also stocks TurboTap NFC Bypass Switch which can be used as alternative or in conjunction with NFC.
5. Video's
   1. DJ High Voltage: Binding (pairing) NFC and Credit Cards (Australia) on Pre-Q2 2024 version. eSN does not recommend going about binding cards if you are not experienced as there is risk of rendering cards inoperable (see notes below):
      
   2. Michael Sha: Binding to phones with Chinese cards (only works with Chinese cards on Chinese devices/phones):
      
   3. Michael Sha: NFC upgrade showing process to uplift from non-NFC to NFC with accompanying Main Cable, Dashboard and with V3 main cable the Front Turn Signal. The Electric System Upgrade video explains this.
      
   4. Video's showing binding on Q4 2024 version adopted on Teverun models, which has the round Super Card (see note below):
      
6. eSN warns against binding cards if you are not experienced as there is risk of rendering cards inoperable. It is understood there are binding limitations. Binding is the process of pairing cards with readers. The older readers were equipped with white LED light and two rectangular ordinary cards, either could commence binding by holding the card (one that is already bound) for a few seconds seconds, which activates the binding process with the light flashing and the reader would bind the next swiped card. There is a limit to the number of cards the reader can bind (or possibly attempt to bind) as there is a memory bank in which stores an array of cards. It is not possible to selectively remove (unbind) a card and the bank can be problematic if there are excessive bind attempts. This can result in registered cards being dropped and/or newer cards being refused (FIFO first in, first out without the out). The Q3 2024 readers with blue LED light adopts a 3rd card which is round (Super Card) which when swiped for 8 seconds activates the binding process. The super card eliminates any accidental binding that initiate with the older reader as the ordinary cards cannot trigger binding due to unexpectedly long (held) swipe. The Q4 2024 version reverted to two rectangular cards.