eSN is closed for eSN2026#JP-CN mission to Japan/China March 2026 - Order fulfilment resumes 16th March | Now Club | Group Ride Guide | Workshops: BSG / On The Run
Kaabo Controller 60V 2x27A V2 {EY3} (select Mantis 10 inc PRO+ / Wolf Warrior X PRO+)
SKU K-CONT-60V-27AX2-MM-V2-03.D.06026
AU$268.18
Suits Mantis 10 PRO+ 2022 onwards & select Plus inc "V2 2025", White JST XH, MiniMotors Square Wave.
In stock: 1 available
1
Save this product for later
Customer reviews
Reviews only from verified customers
No reviews yet. You can buy this product and be the first to leave a review.
Kaabo Controller 60V 2x27A V2 {EY3} (select Mantis 10 inc PRO+ / Wolf Warrior X PRO+)
Product Details
Brand: Kaabo
- The Kaabo Controller 60V 2x27A V2 {EY3} (select Mantis 10 inc PRO+ / Wolf Warrior X PRO+) is the factory stock controller on:
- Kaabo Mantis 10 models of PRO+ models introduced in 2022 and subsequent Elite & SE badges. It is also factory fitted as option on select 10 Plus badge models including those marketed as "V2 2025".
- Kaabo Wolf X PRO+.
These models have a MiniMotors EY3 display/throttle and hub / wire collection board.
- This "V2" version has white JST XH connectors which connect to the hub / wire collection board. The predecessor controller on Mantis is the V1 version with black JST SM connectors and without hub / wire collection board (V1 controller wires connect directly to the main lines). Both versions use MiniMotors (signalling) protocol and the are typically accompanied with the MiniMotors EY3 display/throttle.
- Commonly required to due to damage from water ingress and/or MOSFET damage which can result in resistance on wheel when attempting to freewheel by hand when controller is connected.
- Often referred to as a "2-in-1" as it is a dual motor controller (for both wheels)..
Notes:
- Refer to Reference Materials for Kaabo Page for technical info including wiring diagram guidance.
- It is observed across V2 controller models with hub / wire collection board that a smaller gauge black wire runs from the hub / wire collection board to the underside of deck screw, assumed for grounding purpose.
- Image below shows testing power output from controller. This is one of the troubleshooting methods that can be adopted to determine if the controller is delivering power to the hub / wire collection board via the white XHB 9-pin connector. The meter shows power across the red and black wires.
You May Also Like
Kaabo MiniMotors EY3 Finger Display/Throttle (suit select Mantis & Wolf)
Kaabo MiniMotors EY3 Finger Display/Throttle (suit select Mantis & Wolf)
Suits Kaabo Mantis 8/10 Pro, Wolf Warrior 11 Pro+, King + and X Pro+.
AU$107.27
Wire Collection Board / Hub suit Kaabo Mantis and Wolf Warrior (HUB-1)
Wire Collection Board / Hub suit Kaabo Mantis and Wolf Warrior (HUB-1)
Accommodates white XH/XHB connectors
AU$38.18
Kaabo Controller 60V 2x27A V1 {EY3} (select Mantis 10 inc PRO+)
Kaabo Controller 60V 2x27A V1 {EY3} (select Mantis 10 inc PRO+)
Suits Mantis 10 PRO+ prior to 2022, Black JST SM, MiniMotors Square Wave.
AU$268.18
Kaabo Controller 60V 25A K1 V1 {LT01 & CM06-K1} (select Mantis 10 Plus)
Kaabo Controller 60V 25A K1 V1 {LT01 & CM06-K1} (select Mantis 10 Plus)
Suits Mantis 10 Plus prior to 2022, Black JST SM, Sine Wave.
AU$140.91
Kaabo Controller 60V 25A K1 V2 {LT01 & CM06-K1} (select Mantis 10 Plus)
Kaabo Controller 60V 25A K1 V2 {LT01 & CM06-K1} (select Mantis 10 Plus)
Suits Mantis 10 Plus ~2022-2024, White JST XH, Sine Wave.
AU$140.91
Kaabo Controller 60V 25A K2 {KM03 & CM06-K2} (Mantis 10 Central Display)
Kaabo Controller 60V 25A K2 {KM03 & CM06-K2} (Mantis 10 Central Display)
Suits Central Display equipped models of Mantis 10 Plus & PRO.
AU$152.73
JST Black SM Connector and Cable Assembly Series
JST Black SM Connector and Cable Assembly Series
Internal wiring connectors
AU$27.27
TurboTight Wedge Washer Series (Locking Washers)
TurboTight Wedge Washer Series (Locking Washers)
Helps prevent bolts loosing tension - great for stem.
AU$1.82
Display prices in:AUD
