NAMI Motor 60V 1000w (suit Klima)

• Motor (hub motor / entire wheel) suit NAMI Electric scooter, Klima model. Not intended for use in Klima SE variant (which adopts a lighter motor).
• 45mm magnet design (citation needed).
• Adopts (and fitted with) the integrated water proof motor power and hall sensor wire connector (screw type), this connector is used amongst the Klima and Blast models.
• Available as:
  • Rear motor: cable measures 35cm (shown in product image).
  • Front motor: cable length is 65cm.
• NAMI adopts a M14 axil shaft with 10mm key.
• Includes 7-piece kit containing: TR438 Valve Stem, 2x M14 axil nut, 2x washers (3mm thickness, 1mm thinner than Burn-e) and 2x hook washers (4mm thickness).
• Width of motor at rim measures 70mm (wider than Klima).
• Typically required when entire motor replacement is needed from physical damage to the casing, wire damage, water ingress, mis-wiring or to resolve hall sensor failure (error code 201 rear, 301 font).
• Genuine NAMI Factory Spare, wired for plug-and-play installation.

Notes:

1. Product images show Rear Motor which has the shorter ~35cm cable.
2. The hook washers in the kit are similar to that of the 3 wide washers in the Kaabo Wolf Motor Washer Kit (M14) [TurboTight] which are 3.5mm longer, which influence clearance between tyre and shock.
3. Often physical damage to the rim (outer hub) such as an edge of rim bend, buckle or fracture at bead/heal can be resolved by Rim for the Motor which is the outer assembly of motor (rim with magnets).
4. It is believed this is the only version of motor used amongst Klima production to date (other than the smaller motor in the Klima SE which is not an Australian Model), suggesting replacement is a "straight swap out" with minimal effort required to position and align rotors etc (unlike the Burn-e which has multiple iterations of physical size and motor cable variants).
5. When out of stock, pre-orders can be made and are typically filled within 6 weeks, usually less, as factory orders are placed monthly. If the item shows as in stock (available), this reflects local inventory, Brisbane.
6. Factory paper sticker designation label "03" observed, 1500w Burm-e are "01".
7. Like all eSN products, if showing in stock (available), this reflects local inventory, Brisbane, Australia.
8. Renew motor seals periodically.